Series
ICs for use with 3rd Overtone Crystal Oscillators
NCMOS
NOscillation
Frequency : 125MHz (max)
N3-State
Output
NBuilt-in
Oscillation Capacitor
NBuilt-in
Oscillation Feedback Resistor
NMini
Mold SOT-26 Package
■Applications
GCrystal
Oscillation Modules
GComputer,
DSP Clocks
GCommunication
Equipment
GVarious
System Clocks
■General Description
The XC2163 series are high frequency, low current consumption CMOS
ICs with built-in crystal oscillator and divider circuits.
Output is selectable from any one of the following values for f0 :
f0/1, f0/2, f0/4, f0/8.
With oscillation capacitors and a feedback resistors built-in, it is possible
to configure a stable 3rd overtone oscillator using only an external crystal
oscillator.
Also available is an external oscillation capacitor/external oscillation
feedback resistor type which makes oscillation frequency control
possible.
■Features
Oscillation Frequency
: 40MHz ~ 125MHz (Rf, Cg, Cd
internal ; 5.0V)
(3rd Overtone)
: 57MHz ~ 125MHz (Rf, Cg, Cd
internal ; 3.3V)
: 20MHz ~ 125MHz (Rf, Cg, Cd
external)
Divider Ratio
: Selectable from f0/1, f0/2, f0/4,
f0/8.
Output
: 3-State
Operating Voltage Range
: 3.3V ±10%, 5.0V ±10%
Low Current Consumption
: Stand-by function included *
Ultra Small Package
: SOT-26 mini mold
* oscillation continues in stand-by mode
■Pin Configuration
/INH
XT
V
SS
1
2
3
6
5
4
■Pin Assignment
PIN
PIN NAME
NUMBER
1
/INH
2
3
4
5
6
XT
V
SS
Qo
V
DD
/XT
FUNCTION
Stand-by control*
Crystal Oscillator Connection (Input)
GND
Clock Output
Power Supply
Crystal Oscillator Connection (Output)
/XT
V
DD
Q
O
SOT-26
( TOP VIEW )
* Stand-by control pin has pull-up resistance built-in.
■/INH, Q0 Pin Function
/INH
"H"
"L"
OPEN
"H" = High Level
"L" = Low Level
Q
0
Divider Output
High Impedance
Divider Output
14
1031