欢迎访问ic37.com |
会员登录 免费注册
发布采购

CM453232-5R6K 参数 Datasheet PDF下载

CM453232-5R6K图片预览
型号: CM453232-5R6K
PDF下载: 下载PDF文件 查看货源
内容描述: [General Purpose Inductor, 5.6uH, 10%, 1812]
分类和应用: 测试射频感应器电感器
文件页数/大小: 13 页 / 133 K
品牌: TOKEN [ TOKEN ELECTRONICS INDUSTRY CO., LTD. ]
 浏览型号CM453232-5R6K的Datasheet PDF文件第5页浏览型号CM453232-5R6K的Datasheet PDF文件第6页浏览型号CM453232-5R6K的Datasheet PDF文件第7页浏览型号CM453232-5R6K的Datasheet PDF文件第8页浏览型号CM453232-5R6K的Datasheet PDF文件第9页浏览型号CM453232-5R6K的Datasheet PDF文件第10页浏览型号CM453232-5R6K的Datasheet PDF文件第11页浏览型号CM453232-5R6K的Datasheet PDF文件第13页  
TOKEN MEANS QUALITY AND SERVICE  
Z on p-Board at a frequency range  
of 10-55-10HZ with 1.5mm  
amplitude.  
Dropping  
No evidence of damage  
Dropping 1m over the ground of  
conctete or cement.  
Electrical Characteristics  
REQUIREMENTS  
CHARACTERISTICS  
TEST, METHOD (JIS C 5321)  
DC Superimposition  
No evidence of outer damage,  
L/L shall be within Ř3%.  
Immerse in the solder (H63A) of  
260Ř5for 10Ř1 sec, leave for  
2hrs at normal TEMP.  
Rise in Temperature  
A rise in temperature, when the  
allowable current is appiled for 30  
min., to be measured by  
Within 20ꢁ  
athermoelectric thermometer.  
The current twice the allowable  
current to be applied for 5 min.  
Immerse in the solder (H63A) of  
270Ř5for 5Ř0.5 sec.  
Overcurrent Test  
No noevidence of fuining or  
flaming.  
No evidence of outer damage  
Resistance to Soldering Heat  
Solderability  
More than 75% circumference to Immerse in th solder (H63A) of  
be covered with new soldering.  
260Ř5for 2Ř0.5 sec.  
Dielectric with standing voltage No evidence of fuming, flaming 500V 5 SEC.: V Block.  
or breakdown  
Insulation Resistance  
1000 Mohm and over  
500V 1 mim. : V Block.  
Endurance Test  
REQUIREMENTS  
CHARACTERISTICS  
TEST, METHOD (JIS C 5321)  
LOW TEMP. Characteristics  
Leave for 1000 hrs in a bath of  
TEMP. -25Ř2.  
L/L within Ř10%,  
Q: 30 and over  
Resistance of Heat  
Leave for 1000 hrs in a bath of  
TEMP. 85Ř2.  
L/L within Ř10%,  
Q: 30 and over  
TEMP. Cycling  
Keep for 30 Min. at TEMP. of -25  
~+85at 5 cycle case of  
TEMP. Change from low to high  
and V.V., leave for 10-15 min.at  
normal TEMP.  
L/L within Ř10%,  
Q: 30 and over  
Temperature Characteristics  
L/L within Ř5%  
L/L to be measured at the  
temperature of between -25ꢁ  
and + 85as based on the  
temperature of 20.  
Moisture load Characteristics  
Endurance (moisture load)  
L/L within Ř10%  
L/L within Ř10%  
TEMP. -40Ř2, Humidity  
90~95% 1000 hrs.  
Allowable current on for 1000 hrs  
continuously TEMP. 40Ř2ꢁ  
Huidity: 90-95%  
Endurance (high Temp. overload)  
Allowable current on for 1000 hrs  
continuously at TEMP. of 85Ř2ꢁ  
L/L within Ř10%  
Phone:+886 2 29810109 Fax:+886 2 29887487 Email:token@token.com.tw http://www.token.com.tw  
Page 11/12