TPS929160-Q1
ZHCSNG0 – APRIL 2023
www.ti.com.cn
7.5.4.4 EEPROM PROGRAM state Exit
The REF pin can be released after EEPROM burning if it is pulled high to 5 V for chip selection. The REF pin
must be kept high during all of EEPROM PROGRAM state.
The TPS929160-Q1 can quit the EEPROM PROGRAM state to NORMAL state after burning by writing 0 to
register EEPMODE. TI recommends reloading the EEPROM data to the registers after EEPROM burning by set
1 to REGDEFAULT.
Copyright © 2023 Texas Instruments Incorporated
Submit Document Feedback
53
Product Folder Links: TPS929160-Q1
English Data Sheet: SLVSG60