www.ti.com
SPRS230M – OCTOBER 2003 – REVISED MARCH 2011
8
Revision History
This data sheet revision history highlights the technical changes made to the SPRS230L device-specific
data sheet to make it an SPRS230M revision.
Scope:
See table below.
LOCATION
ADDITIONS, DELETIONS, AND MODIFICATIONS
Signal Descriptions:
•
Updated DESCRIPTION of ADCREFP:
– Changed "Requires a low ESR
(50 mΩ–1.5
Ω)
ceramic bypass capacitor ..." to "Requires a low ESR
(under 1.5
Ω)
ceramic bypass capacitor ..."
– Added
NOTE
about using the ADC Clock rate to derive the ESR specification
•
Updated DESCRIPTION of ADCREFM:
– Changed "Requires a low ESR
(50 mΩ–1.5
Ω)
ceramic bypass capacitor ..." to "Requires a low ESR
(under 1.5
Ω)
ceramic bypass capacitor ..."
– Added
NOTE
about using the ADC Clock rate to derive the ESR specification
Updated "Enhanced Analog-to-Digital Converter (ADC) Module" section
Added "Community Resources" section
Flash Endurance for A and S Temperature Material:
•
Added "ERASE/PROGRAM TEMPERATURE" column heading
Flash Endurance for Q Temperature Material:
•
Added "ERASE/PROGRAM TEMPERATURE" column heading
Flash Parameters at 100-MHz SYSCLKOUT:
•
Erase Time:
– Changed TYP value of 16K Sector from 10 s to 2 s
– Changed TYP value of 8K Sector from 10 s to 2 s
– Changed TYP value of 4K Sector from 10 s to 2 s
Copyright © 2003–2011, Texas Instruments Incorporated
Revision History
135
Product Folder Link(s):