TMS320F28335, TMS320F28334, TMS320F28332
TMS320F28235, TMS320F28234, TMS320F28232
SPRS439I–JUNE 2007–REVISED MARCH 2011
www.ti.com
3.2.8 L0, L1, L2, L3, L4, L5, L6, L7 SARAMs
The F28335/F28235 and F28334/F28234 each contain 32K × 16 of single-access RAM, divided into
8 blocks (L0–L7 with 4K each). The F28332/F28232 contain 24K × 16 of single-access RAM, divided into
6 blocks (L0–L5 with 4K each). Each block can be independently accessed to minimize CPU pipeline
stalls. Each block is mapped to both program and data space. L4, L5, L6, and L7 are DMA-accessible.
3.2.9 Boot ROM
The Boot ROM is factory-programmed with boot-loading software. Boot-mode signals are provided to tell
the bootloader software what boot mode to use on power up. The user can select to boot normally or to
download new software from an external connection or to select boot software that is programmed in the
internal Flash/ROM. The Boot ROM also contains standard tables, such as SIN/COS waveforms, for use
in math related algorithms.
Table 3-6. Boot Mode Selection
MODE
GPIO87/XA15
GPIO86/XA14
GPIO85/XA13
GPIO84/XA12
MODE(1)
F
E
D
C
B
A
9
8
7
6
5
4
3
2
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
Jump to Flash
SCI-A boot
SPI-A boot
I2C-A boot
eCAN-A boot
McBSP-A boot
Jump to XINTF x16
Jump to XINTF x32
Jump to OTP
Parallel GPIO I/O boot
Parallel XINTF boot
Jump to SARAM
Branch to check boot mode
Branch to Flash, skip ADC calibration
Branch to SARAM, skip ADC
calibration
0
0
0
0
0
Branch to SCI, skip ADC calibration
(1) All four GPIO pins have an internal pullup.
NOTE
Modes 0, 1, and 2 in Table 3-6 are for TI debug only. Skipping the ADC calibration function
in an application will cause the ADC to operate outside of the stated specifications
44
Functional Overview
Copyright © 2007–2011, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F28335 TMS320F28334 TMS320F28332 TMS320F28235 TMS320F28234
TMS320F28232
TI [ TEXAS INSTRUMENTS ]
