TMS320VC33
DIGITAL SIGNAL PROCESSOR
SPRS087E -- FEBRUARY 1999 -- REVISED JANUARY 2004
D
High-Performance Floating-Point Digital
D
D
D
D
D
D
D
D
D
D
Signal Processor (DSP):
- TMS320VC33-150
-
- 13-ns Instruction Cycle Time
-
- 150 Million Floating-Point Operations
-
Per Second (MFLOPS)
- 75 Million Instructions Per Second
-
(MIPS)
- TMS320VC33-120
-
- 17-ns Instruction Cycle Time
-
- 120 MFLOPS
-
- 60 MIPS
-
34K
×
32-Bit (1.1-Mbit) On-Chip Words of
Dual-Access Static Random-Access
Memory (SRAM) Configured in 2
×
16K Plus
2
×
1K Blocks to Improve Internal
Performance
x5 Phase-Locked Loop (PLL) Clock
Generator
Very Low Power: < 200 mW @ 150 MFLOPS
32-Bit High-Performance CPU
16-/32-Bit Integer and 32-/40-Bit
Floating-Point Operations
Four Internally Decoded Page Strobes to
Simplify Interface to I/O and Memory
Devices
Boot-Program Loader
EDGEMODE Selectable External Interrupts
32-Bit Instruction Word, 24-Bit Addresses
Eight Extended-Precision Registers
D
On-Chip Memory-Mapped Peripherals:
D
D
D
D
D
D
D
D
D
D
D
D
D
- One Serial Port
-
- Two 32-Bit Timers
-
- Direct Memory Access (DMA)
-
Coprocessor for Concurrent I/O and CPU
Operation
Fabricated Using the 0.18-μm (l
eff
-Effective
Gate Length) TImeline™ Process
Technology by Texas Instruments (TI)
144-Pin Low-Profile Quad Flatpack (LQFP)
(PGE Suffix)
Two Address Generators With Eight
Auxiliary Registers and Two Auxiliary
Register Arithmetic Units (ARAUs)
Two Low-Power Modes
Two- and Three-Operand Instructions
Parallel Arithmetic/Logic Unit (ALU) and
Multiplier Execution in a Single Cycle
Block-Repeat Capability
Zero-Overhead Loops With Single-Cycle
Branches
Conditional Calls and Returns
Interlocked Instructions for
Multiprocessing Support
Bus-Control Registers Configure
Strobe-Control Wait-State Generation
1.8-V (Core) and 3.3-V (I/O) Supply Voltages
On-Chip Scan-Based Emulation Logic,
IEEE Std 1149.1
†
(JTAG)
description
The TMS320VC33 DSP is a 32-bit, floating-point processor manufactured in 0.18-μm four-level-metal CMOS
(TImeline) technology. The TMS320VC33 is part of the TMS320C3x generation of DSPs from Texas
Instruments.
The TMS320C3x’s internal busing and special digital-signal-processing instruction set have the speed and
flexibility to execute up to 150 million floating-point operations per second (MFLOPS). The TMS320VC33
optimizes speed by implementing functions in hardware that other processors implement through software or
microcode. This hardware-intensive approach provides performance previously unavailable on a single chip.
The TMS320VC33 can perform parallel multiply and ALU operations on integer or floating-point data in a single
cycle. Each processor also possesses a general-purpose register file, a program cache, dedicated ARAUs,
internal dual-access memories, one DMA channel supporting concurrent I/O, and a short machine-cycle time.
High performance and ease of use are the results of these features.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
TImeline is a trademark of Texas Instruments.
Other trademarks are the property of their respective owners.
†
IEEE Standard 1149.1-1990 Standard-Test-Access Port
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright
©
2004, Texas Instruments Incorporated
POST OFFICE BOX 1443
•
HOUSTON, TEXAS 77251--1443
1
TI [ TEXAS INSTRUMENTS ]
