TAS5711
www.ti.com
SLOS600 –DECEMBER 2009
RESET TIMING (RESET)
Control signal parameters over recommended operating conditions (unless otherwise noted). Please refer to Recommended
Use Model section on usage of all terminals.
PARAMETER
Pulse duration, RESET active
Time to enable I2C
MIN
TYP
MAX
UNIT
µs
tw(RESET)
100
td(I2C_ready)
12.0
ms
RESET
tw(RESET)
I2C Active
I2C Active
td(I2C_ready)
System Initialization.
Enable via I2C.
T0421-01
NOTES: On power up, it is recommended that the TAS5711 RESET be held LOW for at least 100 μs after DVDD has
reached 3 V.
If the RESET is asserted LOW while PDN is LOW, then the RESET must continue to be held LOW for at least 100 μs
after PDN is deasserted (HIGH).
Figure 5. Reset Timing
Copyright © 2009, Texas Instruments Incorporated
Submit Documentation Feedback
13
Product Folder Link(s): TAS5711
TI [ TEXAS INSTRUMENTS ]
