OPA209
OPA2209
OPA4209
www.ti.com
SBOS426B –NOVEMBER 2008–REVISED AUGUST 2010
APPLICATION INFORMATION
OPERATING VOLTAGE
DESCRIPTION
The OPA209 series of precision operational
amplifiers are unity-gain stable, and free from
unexpected output and phase reversal. Applications
with noisy or high-impedance power supplies require
decoupling capacitors placed close to the device pins.
In most cases, 0.1mF capacitors are adequate.
Figure 31 shows a simplified schematic of the
OPA209. This die uses a SiGe bipolar process and
contains 180 transistors.
The OPA209 series of op amps can be used with
single or dual supplies within an operating range of
VS = +4.5V (±2.25V) up to +36V (±18V). Supply
voltages higher than 40V total can permanently
damage the device; see the Absolute Maximum
Ratings table.
In addition, key parameters are assured over the
specified temperature range, TA = –40°C to +125°C.
Parameters that vary significantly with operating
voltage or temperature are shown in the Typical
Characteristics section of this data sheet.
V+
Pre-Output Driver
OUT
IN-
IN+
V-
Figure 31. OPA209 Simplified Schematic
Copyright © 2008–2010, Texas Instruments Incorporated
Submit Documentation Feedback
11
Product Folder Link(s): OPA209 OPA2209 OPA4209
TI [ TEXAS INSTRUMENTS ]
