SNVS754I – JANUARY 2000 – REVISED APRIL 2013
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
DESCRIPTION (CONTINUED)
The LM78LXX is available in the plastic TO-92 (LP) package, the SOIC-8 (D) package and a chip sized package
(8-Bump DSBGA) using TI's DSBGA package technology. With adequate heat sinking the regulator can deliver
100mA output current. Current limiting is included to limit the peak output current to a safe value. Safe area
protection for the output transistors is provided to limit internal power dissipation. If internal power dissipation
becomes too high for the heat sinking provided, the thermal shutdown circuit takes over preventing the IC from
overheating.
Absolute Maximum Ratings
(1) (2)
Power Dissipation
Input Voltage
Storage Temperature
ESD Susceptibility
(4)
(3)
Internally Limited
35V
−65°C
to +150°C
1kV
0°C to 125°C
0°C to 125°C
-40°C to 125°C
−40°C
to 85°C
−40°C
to 85°C
235°C
260°C (lead time)
Operating Junction Temperature
LM78LxxACZ, TO-92
LM78LxxACM, SOIC-8
LM78LxxAIM, SOIC-8
LM78LxxIBPX, DSBGA
LM78LxxITP, Thin DSBGA
Soldering Information
Infrared or Convection (20 sec.)
Wave Soldering (10 sec.)
(1)
(2)
(3)
(4)
Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Electrical specifications do not apply when
operating the device outside of its stated operating conditions.
If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/Distributors for availability and
specifications.
Typical thermal resistance values for the packages are:
LP
Package:
θ
JC
= 60 °C/W, =
θ
JA
= 230 °C/W
D
Package:
θ
JA
= 180 °C/W
DSBGA
Package:
θ
JA
= 230.9°C/W
Human body model, 1.5 kΩ in series with 100pF.
LM78LXX Electrical Characteristics LM78L05AC / LM78L05I
Limits in standard typeface are for T
J
= 25°C,
Bold typeface applies over the entire operating temperature range of the
indicated package.
Limits are ensured by production testing or correlation techniques using standard Statistical Quality
Control (SQC) methods. Unless otherwise specified: I
O
= 40mA, C
I
= 0.33μF, C
O
= 0.1μF.
Unless otherwise specified, V
IN
= 10V
Symbol
V
O
Output Voltage
7V
≤
V
IN
≤
20V
1mA
≤
I
O
≤
40mA
(1)
Parameter
Conditions
Min
4.8
4.75
4.75
Typ
5
Max
5.2
5.25
5.25
Units
V
1mA
≤
I
O
≤
70mA
(1)
ΔV
O
ΔV
O
Line Regulation
Load Regulation
7V
≤
V
IN
≤
20V
8V
≤
V
IN
≤
20V
1mA
≤
I
O
≤
100mA
1mA
≤
I
O
≤
40mA
18
10
20
5
75
54
60
30
mV
(1)
2
Power dissipation
≤
0.75W.
Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: