LM741
SNOSC25C –MAY 1998–REVISED MARCH 2013
www.ti.com
Typical Application
Figure 4. Offset Nulling Circuit
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings(1)(2)(3)
LM741A
±22V
LM741
±22V
LM741C
±18V
Supply Voltage
(4)
Power Dissipation
500 mW
500 mW
500 mW
Differential Input Voltage
±30V
±30V
±30V
(5)
Input Voltage
±15V
±15V
±15V
Output Short Circuit Duration
Operating Temperature Range
Storage Temperature Range
Junction Temperature
Continuous
−55°C to +125°C
−65°C to +150°C
150°C
Continuous
−55°C to +125°C
−65°C to +150°C
150°C
Continuous
0°C to +70°C
−65°C to +150°C
100°C
Soldering Information
P0008E-Package (10 seconds)
NAB0008A- or LMC0008C-Package (10 seconds)
M-Package
260°C
300°C
260°C
300°C
260°C
300°C
Vapor Phase (60 seconds)
Infrared (15 seconds)
215°C
215°C
400V
215°C
215°C
400V
215°C
215°C
400V
(6)
ESD Tolerance
(1) “Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is functional, but do not ensure specific performance limits.
(2) For military specifications see RETS741X for LM741 and RETS741AX for LM741A.
(3) If Military/Aerospace specified devices are required, please contact the TI Sales Office/Distributors for availability and specifications.
(4) For operation at elevated temperatures, these devices must be derated based on thermal resistance, and Tj max. (listed under “Absolute
Maximum Ratings”). Tj = TA + (θjA PD).
(5) For supply voltages less than ±15V, the absolute maximum input voltage is equal to the supply voltage.
(6) Human body model, 1.5 kΩ in series with 100 pF.
Electrical Characteristics(1)
LM741A
Typ
LM741
LM741C
Parameter
Test Conditions
Units
Min
Max
Min Typ Max Min Typ Max
Input Offset Voltage
TA = 25°C
R
S ≤ 10 kΩ
S ≤ 50Ω
1.0
5.0
6.0
2.0
6.0
7.5
mV
R
0.8
3.0
4.0
TAMIN ≤ TA ≤ TAMAX
RS ≤ 50Ω
mV
RS ≤ 10 kΩ
Average Input Offset Voltage
Drift
15
μV/°C
(1) Unless otherwise specified, these specifications apply for VS = ±15V, −55°C ≤ TA ≤ +125°C (LM741/LM741A). For the LM741C/LM741E,
these specifications are limited to 0°C ≤ TA ≤ +70°C.
2
Submit Documentation Feedback
Copyright © 1998–2013, Texas Instruments Incorporated
Product Folder Links: LM741
TI [ TEXAS INSTRUMENTS ]
