SNOSC25C – MAY 1998 – REVISED MARCH 2013
Typical Application
Figure 4. Offset Nulling Circuit
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings
(1) (2) (3)
LM741A
Supply Voltage
Power Dissipation
Input Voltage
(5)
(4)
LM741
±22V
500 mW
±30V
±15V
Continuous
−55°C
to +125°C
−65°C
to +150°C
150°C
260°C
300°C
215°C
215°C
400V
LM741C
±18V
500 mW
±30V
±15V
Continuous
0°C to +70°C
−65°C
to +150°C
100°C
260°C
300°C
215°C
215°C
400V
±22V
500 mW
±30V
±15V
Continuous
−55°C
to +125°C
−65°C
to +150°C
150°C
260°C
300°C
215°C
215°C
400V
Differential Input Voltage
Output Short Circuit Duration
Operating Temperature Range
Storage Temperature Range
Junction Temperature
Soldering Information
P0008E-Package (10 seconds)
NAB0008A- or LMC0008C-Package (10 seconds)
M-Package
Vapor Phase (60 seconds)
Infrared (15 seconds)
ESD Tolerance
(1)
(2)
(3)
(4)
(5)
(6)
(6)
“Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is functional, but do not ensure specific performance limits.
For military specifications see RETS741X for LM741 and RETS741AX for LM741A.
If Military/Aerospace specified devices are required, please contact the TI Sales Office/Distributors for availability and specifications.
For operation at elevated temperatures, these devices must be derated based on thermal resistance, and T
j
max. (listed under “Absolute
Maximum Ratings”). T
j
= T
A
+ (θ
jA
P
D
).
For supply voltages less than ±15V, the absolute maximum input voltage is equal to the supply voltage.
Human body model, 1.5 kΩ in series with 100 pF.
Electrical Characteristics
(1)
Parameter
Input Offset Voltage
Test Conditions
T
A
= 25°C
R
S
≤
10 kΩ
R
S
≤
50Ω
T
AMIN
≤
T
A
≤
T
AMAX
R
S
≤
50Ω
R
S
≤
10 kΩ
Average Input Offset Voltage
Drift
15
4.0
6.0
7.5
μV/°C
mV
0.8
3.0
1.0
5.0
2.0
6.0
mV
LM741A
Min
Typ
Max
Min
LM741
Typ
Max
Min
LM741C
Typ
Max
Units
(1)
2
Unless otherwise specified, these specifications apply for V
S
= ±15V,
−55°C ≤
T
A
≤
+125°C (LM741/LM741A). For the LM741C/LM741E,
these specifications are limited to 0°C
≤
T
A
≤
+70°C.
Product Folder Links:
Copyright © 1998–2013, Texas Instruments Incorporated
TI [ TEXAS INSTRUMENTS ]
