SNVS778D – MAY 1999 – REVISED APRIL 2013
Typical Applications
Full output current not available at high input-output voltages
†C1 = 1
μF
solid tantalum or 10
μF
aluminum electrolytic required for stability
*C2 = 1
μF
solid tantalum is required only if regulator is more than 4″ from power-supply filter capacitor
Output capacitors in the range of 1
μF
to 1000
μF
of aluminum or tantalum electrolytic are commonly used to provide
improved output impedance and rejection of transients
Figure 1. Adjustable Negative Voltage Regulator
Comparison between SOT-223 and D-Pak (TO-252) Packages
Figure 2. Scale 1:1
2
Product Folder Links:
Copyright © 1999–2013, Texas Instruments Incorporated
TI [ TEXAS INSTRUMENTS ]
