SNOSBJ1E – MAY 1999 – REVISED MARCH 2013
Increases typical common mode slew from 7.0V/μs to 18V/μs.
Figure 3. Increasing Input Stage Current
Figure 4. Detector for Magnetic Transducer
*Absorbs inductive kickback of relay and protects IC from severe
voltage transients on V
++
line.
Do Not
Ground Strobe Pin.
Figure 5. Digital Transmission Isolator
Figure 6. Relay Driver with Strobe
Do Not
Ground Strobe Pin.
Typical input current is 50 pA with inputs strobed off.
Pin connections shown in
and
are for the LMC TO-99 package.
*Solid tantalum
Figure 7. Strobing off Both Input and Output
Stages
Figure 8. Positive Peak Detector
2
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: