LM2576, LM2576HV
SNVS107C –JUNE 1999–REVISED APRIL 2013
www.ti.com
(For Continuous Mode Operation)
Figure 27. LM2576(HV)-ADJ
PROCEDURE (Adjustable Output Voltage Versions)
EXAMPLE (Adjustable Output Voltage Versions)
Given:
Given:
VOUT = Regulated Output Voltage
VOUT = 10V
VIN(Max) = Maximum Input Voltage
ILOAD(Max) = Maximum Load Current
F = Switching Frequency (Fixed at 52 kHz)
VIN(Max) = 25V
ILOAD(Max) = 3A
F = 52 kHz
1. Programming Output Voltage (Selecting R1 and R2, as shown 1. Programming Output Voltage(Selecting R1 and R2)
in Figure 21 and Figure 22)
Use the following formula to select the appropriate resistor values.
R1 can be between 1k and 5k. (For best temperature coefficient and
stability with time, use 1% metal film resistors)
R2 = 1k (8.13 − 1) = 7.13k, closest 1% value is 7.15k
14
Submit Documentation Feedback
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: LM2576 LM2576HV
TI [ TEXAS INSTRUMENTS ]
