LM1575, LM2575-N, LM2575HV
SNVS106E –MAY 1999–REVISED APRIL 2013
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
(1)(2)(3)
ABSOLUTE MAXIMUM RATINGS
Maximum Supply Voltage
LM1575/LM2575
LM2575HV
45V
63V
ON /OFF Pin Input Voltage
Output Voltage to Ground
Power Dissipation
−0.3V ≤ V ≤ +VIN
−1V
(Steady State)
Internally Limited
−65°C to +150°C
150°C
Storage Temperature Range
Maximum Junction Temperature
Minimum ESD Rating
(C = 100 pF, R = 1.5 kΩ)
2 kV
Lead Temperature
(Soldering, 10 sec.)
260°C
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional, but do not ensure specific performance limits. For specified specifications and test
conditions, see Electrical Characteristics.
(2) If Military/Aerospace specified devices are required, please contact the TI Sales Office/ Distributors for availability and specifications.
(3) Refer to RETS LM1575J for current revision of military RETS/SMD.
OPERATING RATINGS
Temperature Range
LM1575
−55°C ≤ TJ ≤ +150°C
LM2575/LM2575HV
LM1575/LM2575
LM2575HV
−40°C ≤ TJ ≤ +125°C
Supply Voltage
40V
60V
ELECTRICAL CHARACTERISTICS LM1575-3.3, LM2575-3.3, LM2575HV-3.3
Specifications with standard type face are for TJ = 25°C, and those with boldface type apply over full Operating
Temperature Range .
LM2575-3.3
LM1575-3.3
Units
(Limits)
LM2575HV-3.3
Symbol
Parameter
Conditions
Typ
(1)
(2)
Limit
Limit
SYSTEM PARAMETERS Test Circuit Figure 25 and Figure 26(3)
VOUT
VOUT
VOUT
η
Output Voltage
VIN = 12V, ILOAD = 0.2A
Circuit Figure 25 and Figure 26
3.3
V
3.267
3.333
3.234
3.366
V(Min)
V(Max)
V
Output Voltage
LM1575/LM2575
4.75V ≤ VIN ≤ 40V, 0.2A ≤ ILOAD ≤ 1A
Circuit Figure 25 and Figure 26
3.3
3.3
75
3.200/3.168
3.400/3.432
3.168/3.135
3.432/3.465
V(Min)
V(Max)
V
Output Voltage
LM2575HV
4.75V ≤ VIN ≤ 60V, 0.2A ≤ ILOAD ≤ 1A
Circuit Figure 25 and Figure 26
3.200/3.168
3.416/3.450
3.168/3.135
3.450/3.482
V(Min)
V(Max)
%
Efficiency
VIN = 12V, ILOAD = 1A
(1) All limits specified at room temperature (standard type face) and at temperature extremes (bold type face). All limits are used to
calculate Average Outgoing Quality Level, and all are 100% production tested.
(2) All limits specified at room temperature (standard type face) and at temperature extremes (bold type face). All room temperature limits
are 100% production tested. All limits at temperature extremes are specified via correlation using standard Statistical Quality Control
(SQC) methods.
(3) External components such as the catch diode, inductor, input and output capacitors can affect switching regulator system performance.
When the LM1575/LM2575 is used as shown in the test circuit Figure 25 and Figure 26, system performance will be as shown in system
parameters of Electrical Characteristics.
4
Submit Documentation Feedback
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: LM1575 LM2575-N LM2575HV