SNVS106E – MAY 1999 – REVISED APRIL 2013
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
ABSOLUTE MAXIMUM RATINGS
Maximum Supply Voltage
ON /OFF Pin Input Voltage
Output Voltage to Ground
Power Dissipation
Storage Temperature Range
Maximum Junction Temperature
Minimum ESD Rating
Lead Temperature
(1)
(2)
(3)
(1) (2) (3)
LM1575/LM2575
LM2575HV
(Steady State)
45V
63V
−0.3V ≤
V
≤
+V
IN
−1V
Internally Limited
−65°C
to +150°C
150°C
(C = 100 pF, R = 1.5 kΩ)
(Soldering, 10 sec.)
2 kV
260°C
Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional, but do not ensure specific performance limits. For specified specifications and test
conditions, see
If Military/Aerospace specified devices are required, please contact the TI Sales Office/ Distributors for availability and specifications.
Refer to RETS LM1575J for current revision of military RETS/SMD.
OPERATING RATINGS
Temperature Range
Supply Voltage
LM1575
LM2575/LM2575HV
LM1575/LM2575
LM2575HV
−55°C ≤
T
J
≤
+150°C
−40°C ≤
T
J
≤
+125°C
40V
60V
ELECTRICAL CHARACTERISTICS LM1575-3.3, LM2575-3.3, LM2575HV-3.3
Specifications with standard type face are for T
J
= 25°C, and those with
boldface type
apply over
full Operating
Temperature Range
.
Symbol
Parameter
Conditions
Typ
LM1575-3.3
Limit
SYSTEM PARAMETERS
Test Circuit
and
(3)
V
OUT
Output Voltage
V
IN
= 12V, I
LOAD
= 0.2A
Circuit
and
3.3
3.267
3.333
V
OUT
Output Voltage
LM1575/LM2575
4.75V
≤
V
IN
≤
40V, 0.2A
≤
I
LOAD
≤
1A
Circuit
and
3.3
3.200/3.168
3.400/3.432
V
OUT
Output Voltage
LM2575HV
4.75V
≤
V
IN
≤
60V, 0.2A
≤
I
LOAD
≤
1A
Circuit
and
3.3
3.200/3.168
3.416/3.450
η
(1)
(2)
(3)
Efficiency
V
IN
= 12V, I
LOAD
= 1A
75
3.168/3.135
3.450/3.482
3.168/3.135
3.432/3.465
3.234
3.366
V
V(Min)
V(Max)
V
V(Min)
V(Max)
V
V(Min)
V(Max)
%
(1)
LM2575-3.3
LM2575HV-3.3
Limit
(2)
Units
(Limits)
All limits specified at room temperature (standard type face) and at
temperature extremes (bold type face).
All limits are used to
calculate Average Outgoing Quality Level, and all are 100% production tested.
All limits specified at room temperature (standard type face) and at
temperature extremes (bold type face).
All room temperature limits
are 100% production tested. All limits at
temperature extremes
are specified via correlation using standard Statistical Quality Control
(SQC) methods.
External components such as the catch diode, inductor, input and output capacitors can affect switching regulator system performance.
When the LM1575/LM2575 is used as shown in the test circuit
and
system performance will be as shown in system
parameters of
4
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links:
TI [ TEXAS INSTRUMENTS ]
