ꢀꢁ ꢂ ꢃꢄ ꢅ ꢀꢁ ꢂ ꢃ ꢄ ꢆꢅ ꢀ ꢁꢃ ꢃ ꢄ ꢅ ꢀ ꢁꢃ ꢃ ꢄ ꢆꢅ ꢀ ꢁꢇ ꢃ ꢄ ꢅ ꢀ ꢁꢇ ꢃ ꢄ ꢆꢅ ꢀ ꢁꢃ ꢈ ꢉ ꢃ ꢅ ꢀꢁ ꢃ ꢈꢉ ꢃꢊꢅ
ꢀꢁ ꢃ ꢃꢄ ꢋ ꢅ ꢀꢁ ꢃ ꢃꢄ ꢋꢆ ꢅ ꢀ ꢁꢇ ꢃ ꢄ ꢋꢅ ꢀ ꢁꢇ ꢃ ꢄ ꢋꢆꢅ ꢀ ꢁꢃ ꢈ ꢉ ꢃ ꢋꢅ ꢀ ꢁꢃ ꢈ ꢉ ꢃ ꢋꢊꢅ ꢀ ꢁꢃ ꢈꢉ ꢃꢋ ꢆꢊ
ꢌ ꢍꢆꢎꢏ ꢍꢐꢀ ꢑ ꢒ ꢐꢑꢏ ꢆꢓ ꢔꢒ ꢕꢆꢀ ꢆꢁ ꢐ ꢀꢔ ꢖꢔ ꢑꢏ ꢗ
SLOS066R − SEPTEMBER 1975 − REVISED JANUARY 2005
†
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
ALL OTHER
LM2902
UNIT
DEVICES
16 or 32
32
Supply voltage, V
CC
(see Note 1)
13 or 26
26
V
V
V
Differential input voltage, V (see Note 2)
ID
Input voltage, V (either input)
−0.3 to 26
−0.3 to 32
I
Duration of output short circuit (one amplifier) to ground at (or below) T = 25°C,
A
Unlimited
Unlimited
V
CC
≤ 15 V (see Note 3)
D package
DB package
N package
NS package
PW package
FK package
J package
86
96
86
96
80
80
Package thermal impedance, θ (see Notes 4 and 5)
JA
°C/W
°C/W
76
76
113
113
5.61
15.05
14.65
150
Package thermal impedance, q
(see Notes 6 and 7)
JC
W package
Operating virtual junction temperature, T
Case temperature for 60 seconds
150
°C
°C
°C
°C
J
FK package
260
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds
Storage temperature range, T
J or W package
300
300
−65 to 150
−65 to 150
stg
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values (except differential voltages and V
specified for the measurement of I ) are with respect to the network GND.
CC
OS
2. Differential voltages are at IN+, with respect to IN−.
3. Short circuits from outputs to V can cause excessive heating and eventual destruction.
CC
4. Maximum power dissipation is a function of T (max), q , and T . The maximum allowable power dissipation at any allowable
JA
J
A
ambient temperature is P = (T (max) − T )/q . Operating at the absolute maximum T of 150°C can affect reliability.
D
J
A
JA
5. The package thermal impedance is calculated in accordance with JESD 51-7.
6. Maximum power dissipation is a function of T (max), q , and T . The maximum allowable power dissipation at any allowable case
J
J
JC
C
temperature is P = (T (max) − T )/q . Operating at the absolute maximum T of 150°C can affect reliability.
7. The package thermal impedance is calculated in accordance with MIL-STD-883.
D
J
C
JC
J
ESD protection
TEST CONDITIONS
TYP
UNIT
Human-Body Model
LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV
2
kV
5
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TI [ TEXAS INSTRUMENTS ]
