SNVS039H – JUNE 2000 – REVISED MAY 2013
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings
(1) (2)
Maximum Input-to-Output Voltage Differential
LM1086-ADJ
LM1086-1.8
LM1086-2.5
LM1086-2.85
LM1086-3.3
LM1086-3.45
LM1086-5.0
Power Dissipation
(3)
(4)
29V
27V
27V
27V
27V
27V
25V
Internally Limited
150°C
-65°C to 150°C
260°C, to 10 sec
2000V
Junction Temperature (T
J
)
Lead Temperature
ESD Tolerance
(1)
(2)
(3)
(4)
(5)
(5)
Storage Temperature Range
Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional, but specific performance is not ensured. For ensured specifications and the test
conditions, see the Electrical Characteristics.
If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/Distributors for availability and
specifications.
Power dissipation is kept in a safe range by current limiting circuitry. Refer to
in
The value
θ
JA
for the WSON package is specifically dependent on PCB trace area, trace material, and the number of thermal vias. For improved
thermal resistance and power dissipation for the WSON package, refer to Application Note AN-1187 (literature number
The maximum power dissipation is a function of T
J(MAX)
,
θ
JA
, and T
A
. The maximum allowable power dissipation at any ambient
temperature is P
D
= (T
J(MAX)
–T
A
)/θ
JA
. All numbers apply for packages soldered directly into a PC board. Refer to Thermal
Considerations in the Application Notes.
For testing purposes, ESD was applied using human body model, 1.5kΩ in series with 100pF.
Operating Ratings
(1)
Junction Temperature Range (T
J
)
"C" Grade
"I" Grade
(1)
(2)
(2)
Control Section
Output Section
Control Section
Output Section
0°C to 125°C
0°C to 150°C
−40°C
to 125°C
−40°C
to 150°C
Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional, but specific performance is not ensured. For ensured specifications and the test
conditions, see the Electrical Characteristics.
The maximum power dissipation is a function of T
J(MAX)
,
θ
JA
, and T
A
. The maximum allowable power dissipation at any ambient
temperature is P
D
= (T
J(MAX)
–T
A
)/θ
JA
. All numbers apply for packages soldered directly into a PC board. Refer to Thermal
Considerations in the Application Notes.
Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links:
3