MECHANICAL DATA
MPDI072 – AUGUST 2001
NVF (R-PDIP-T8/16)
PLASTIC DUAL-IN-LINE
D
0.775 (21,34)
0.735 (18,67)
16
9
0.280 (7,11)
0.240 (6,10)
D
1
8
Index
Area
0.195 (4,95)
0.115 (2,92)
0.210 (5,33)
0.070 (1,78)
0.045 (1,14)
0.325 (8,26)
0.300 (7,62)
0.045 (1,14)
0.030 (0,76)
MAX
C
Seating Plane
Base Plane
E
0.300 (7,63)
0.150 (3,81)
0.115 (2,92)
0.005 (0,13)
MIN 4 PL
1/2 Lead
0.100 (2,54)
0.014 (0,36)
0.008 (0,20)
0.060 (1,52)
D
0.022 (0,56)
0.014 (0,36)
0.015 (0,38)
MIN
F
0.010 (0,25)
C
0.000 (0,00)
M
0.430 (10,92)
MAX
F
4202501/A 08/01
A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Falls within JEDEC MS-001-BB with the exception of lead
count.
D. Dimensions do not include mold flash or protrusions.
Mold flash or protrusions shall not exceed 0.010 (0,25).
E. Dimensions measured with the leads constrained to be
perpendicular to Datum C.
F. Dimensions are measured at the lead tips with the leads
unconstrained.
G. A visual index feature must be located within the
cross-hatched area.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265