PIN CONFIGURATION
ELECTROSTATIC
DISCHARGE SENSITIVITY
Top View
DIP/SOIC
(1)
This integrated circuit can be damaged by ESD. Texas Instru-
ments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling
and installation procedures can cause damage.
•
Ref
–In
+In
V–
NC
1
2
8
100kΩ
100kΩ
10kΩ
10kΩ
7
V+
ESD damage can range from subtle performance degrada-
tion to complete device failure. Precision integrated circuits
may be more susceptible to damage because very small
parametric changes could cause the device not to meet its
published specifications.
3
4
6
5
Output
Sense
INA106
NOTE: (1) Pin 1 indentifier for SO-8 package.
Model number identification may be abbreviated
on SO-8 package due to limited available space.
PACKAGE/ORDERING INFORMATION
For the most current package and ordering information, see
the Package Option Addendum located at the end of this
data sheet.
ABSOLUTE MAXIMUM RATINGS
Power Supply Voltage ...................................................................... ±18V
Input Voltage Range ............................................................................ ±VS
Operating Temperature Range: P, U ................................ –40°C to +85°C
Storage Temperature Range ............................................ –40°C to +85°C
Lead Temperature (soldering, 10s): P .......................................... +300°C
Wave Soldering (3s, max) U .......................................................... +260°C
Output Short Circuit to Common .............................................. Continuous
NOTE: (1) Stresses above those listed under “Absolute Maximum Ratings”
may cause permanent damage to the device. Exposure to absolute maximum
conditions for extended periods may affect device reliability.
INA106
SBOS152A
3
www.ti.com
TI [ TEXAS INSTRUMENTS ]
