SNLS093C – APRIL 1999 – REVISED APRIL 2013
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings
(1) (2)
Supply Voltage (V
CC
)
Supply Voltage (V
+
)
Supply Voltage (V )
Driver Input Voltage
Driver Output
(3)
−
+7V
+15V
−15V
0V to V
CC
±15V
±25V
0V to V
CC
DW Package
1488 mW
11.9 mW/°C above +25°C
−65°C
to +150°C
+260°C
≥1.5
kV
Voltage (Power Off)
Receiver Input Voltage
Receiver Output Voltage (R
OUT
)
Maximum Package Power Dissipation @
+25°C
Derate DW Package
Storage Temperature Range
Lead Temperature Range (Soldering, 4 seconds)
ESD Ratings (HBM, 1.5 kΩ, 100 pF)
(1)
(2)
(3)
Absolute Maximum Ratings are those values beyond which the safety of the device cannot be specified. They are not meant to imply
that the devices should be operated at these limits. The table of Electrical Characteristics specifies conditions of device operation.
If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
Only one driver output shorted at a time.
Recommended Operating Conditions
Min
Supply Voltage (V
CC
)
Supply Voltage (V
+
)
Supply Voltage (V )
Operating Free Air Temperature (T
A
)
−
Typ
+5.0
+12.0
−12.0
25
Max
+5.25
+13.2
−9.0
70
Units
V
V
V
°C
+4.75
+9.0
−13.2
0
Electrical Characteristics
(1)
Over recommended supply voltage and operating temperature ranges, unless otherwise specified.
Symbol
I
CC
I
+
Parameter
V
CC
Supply Current
V Supply Current
+
(1)
Conditions
No Load, All Inputs at +5V
No Load, All Driver
Inputs at 0.8V or +2V
All Receiver Inputs
at 0.8V or 2.4V.
V = 9V, V =
−9V
V
+
= 13.2V, V
−
=
−13.2V
V
+
= 9V, V
−
=
−9V
V = 13.2V, V =
−13.2V
+
−
+
−
Min
Typ
(2)
21.0
8.7
13
−12.5
−16.5
Max
30
15
22
−22
−28
Units
mA
mA
mA
mA
mA
DEVICE CHARACTERISTICS
I
−
V
−
Supply Current
(1)
(1)
(2)
Current into device pins is defined as positive. Current out of device pins is defined as negative. All voltages are referenced to ground
unless otherwise specified. For current, minimum and maximum values are specified as an absolute value and the sign is used to
indicate direction. For voltage logic levels, the more positive value is designated as maximum. For example, if
−6V
is a maximum, the
typical value (−6.8V) is more negative.
All typicals are given for: V
CC
= +5.0V, V
+
= +12.0V, V
−
=
−12V,
T
A
= +25°C.
2
Product Folder Links:
Copyright © 1999–2013, Texas Instruments Incorporated
TI [ TEXAS INSTRUMENTS ]
