欢迎访问ic37.com |
会员登录 免费注册
发布采购

DRV8860PW 参数 Datasheet PDF下载

DRV8860PW图片预览
型号: DRV8860PW
PDF下载: 下载PDF文件 查看货源
内容描述: 8通道串行接口低侧驱动器 [8 Channel Serial Interface Low-Side Driver]
分类和应用: 驱动器
文件页数/大小: 31 页 / 1394 K
品牌: TI [ TEXAS INSTRUMENTS ]
 浏览型号DRV8860PW的Datasheet PDF文件第2页浏览型号DRV8860PW的Datasheet PDF文件第3页浏览型号DRV8860PW的Datasheet PDF文件第4页浏览型号DRV8860PW的Datasheet PDF文件第5页浏览型号DRV8860PW的Datasheet PDF文件第6页浏览型号DRV8860PW的Datasheet PDF文件第7页浏览型号DRV8860PW的Datasheet PDF文件第8页浏览型号DRV8860PW的Datasheet PDF文件第9页  
SLRS065A – SEPTEMBER 2013 – REVISED NOVEMBER 2013
8 Channel Serial Interface Low-Side Driver
Check for Samples:
1
FEATURES
8-Channel Protected Low-side Driver
– Eight NMOS FETs with Overcurrent
Protection
– Integrated Inductive Catch Diodes
– Open/Short Load Detection
– Configurable 100% Output Timing
– Configurable PWM Duty Cycle
Continuous Current Driving Capability
– 560mA (Single Channel on)
– 280mA (Quad Channels on)
– 200mA (Oct Channels on)
– Support Parallel Configuration
8V to 38V Supply Voltage Range
Input Digital Noise Filter for Noise Immunity
Internal Data Read Back Capability for Reliable
Control
Programmable Current Profile
– Configurable 100% Output Timing. Fast
Activation of Solenoid.
– Configurable PWM Duty Cycle in Chopping
Mode. Reducing Power Consumption and
Thermal Dissipation in Hold-mode of
Solenoid.
Serial Interface
– Daisy Chain Connection
16-pin TSSOP Package
Protection and Diagnostic Features
– Overcurrent Protection (OCP)
– Open Load Detection (OL)
– Over-Temperature Shutdown (OTS)
– Under-Voltage Lockout (UVLO)
– Individual Channel Status Report
– Fault Condition Alarm
APPLICATIONS
Relays
Unipolar Stepper Motors
Solenoids
Electromagnetic Drivers
General Low-side Switch Applications
DESCRIPTION
The DRV8860 provides an 8-channel low side driver
with overcurrent protection and open/shorted load
detection. It has built-in diodes to clamp turn-off
transients generated by inductive loads, and can be
used to drive unipolar stepper motors, DC motors,
relays, solenoids, or other loads.
DRV8860 can supply up to 200mA × 8 channel
continuous output current. The current driving
capability increased with lower PWM duty cycle. A
single channel can deliver up to 560mA continuous
output current. Refer to the
section for details.
A serial interface is provided to control the DRV8860
output drivers, configure internal setting register and
read the fault status of each channel. Multiple
DRV8860 devices can be daisy-chained together to
use a single serial interface. Energizing-Time and
Holding-PWM-Duty cycles are configurable through
serial interface as well. These functions allow for
lower temperature operation rather than traditional
always-on solutions.
Internal shutdown functions are provided for over
current protection, short circuit protection, under
voltage lockout, and over temperature. DRV8860 can
diagnosis the open load condition. Fault information
for each channel can be read out through serial
interface and indicated by an external fault pin.
The DRV8860 is packaged in a 16 pin TSSOP
package (Eco-friendly: RoHS and no Sb/Br).
Ordering Information
For the most current packaging and ordering information, see the Package Option Addendum at the end of this
document, or see the TI web site at
The package drawings, thermal data, and symbolization are available at
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2013, Texas Instruments Incorporated