CDC9841
PC MOTHERBOARD CLOCK SYNTHESIZER/DRIVER
WITH 3-STATE OUTPUTS
SCAS458D – DECEMBER 1994 – REVISED APRIL 1996
DW PACKAGE
(TOP VIEW)
Four CPU Clock Outputs With
Programmable Frequency
(50 MHz, 60 MHz, and 66 MHz)
1
28
27
26
25
24
23
22
21
20
19
18
17
16
15
V
REF0
REF1
CC
X1
Six Clock Outputs at Half-CPU Frequency
for PCI
2
3
X2
V
CC
One 24-MHz Clock Output
4
GND
OE
PCLK0
PCLK1
CLK12
CLK24
GND
BCLK2
BCLK3
5
One 12-MHz Clock Output
6
Two 14.318-MHz Reference Outputs
7
All Output Clock Frequencies Derived From
a Single 14.31818-MHz Crystal Input
8
V
CC
9
PCLK2
PCLK3
GND
SEL1
SEL0
V
CC
LVTTL-Compatible Inputs and Outputs
10
11
12
13
14
BCLK4
BCLK5
GND
BCLK1
BCLK0
Internal Loop Filters for Phase-Lock Loops
Eliminate the Need for External
Components
Operates at 3.3 V
CC
V
CC
Distributed V
Switching Noise
and Ground Pins Reduce
CC
Packaged in Plastic Small-Outline Package
description
The CDC9841 is a high-performance clock synthesizer/driver that generates all required clock signals
necessary for a high-performance PC motherboard. The four central processing unit (CPU) clock outputs
(PCLKn) are programmable to one of three frequencies (50 MHz, 60 MHz, or 66 MHz) via the SEL0 and SEL1
control inputs. The six peripheral-component-interconnect (PCI) clock outputs (BCLKn) are half the frequency
ofPCLKnandaredelayed1nsto4nsfromtherisingedgeoftheCPUclock. Inaddition, thefourfixed-frequency
outputs provide a 24-MHz clock (CLK24), a 12-MHz clock (CLK12), and two buffered copies of the 14.318-MHz
input reference (REF0, REF1).
The CDC9841 generates all output frequencies from a 14.31818-MHz crystal input. A reference clock can be
provided at X1 instead of a crystal input.
Two phase-lock loops (PLLs) generate the CPU clock frequency and the 24-MHz clock frequency. On-chip loop
filters and internal feedback eliminate the need for external components. The PCI and 12-MHz clock
frequencies are derived from the base CPU and 24-MHz clock frequencies, respectively. The PLL circuit can
be bypassed in the TEST mode (i.e., SEL0 = SEL1 = H) to distribute a test clock provided at the X1 input.
Becausethe CDC9841 is based on PLL circuitry, it requires a stabilization time to achieve phase lock of the PLL.
This stabilization time is required following power up and application of a fixed-frequency, fixed-phase signal
at the X1 input, as well as following any changes to the SELn inputs.
PCLKn and BCLKn provide low-skew/low-jitter clock signals for reliable clock operation. All outputs are 3 state
and are enabled via OE.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 1996, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265