bq24020, bq24022,
bq24023, bq24024
bq24025, bq24026
SLUS549C − DECEMBER 2002 − REVISED AUGUST 2004
www.ti.com
DESCRIPTION (CONTINUED)
In addition to the standard features, different versions of the bqTINY-II offer a multitude of additional features. These include
temperature sensing input for detecting hot or cold battery packs; power good (PG) output indicating the presence of input
power; a TTL-level charge enable input (CE) used to disable or enable the charge process; and a TTL-level timer and
taper−detect enable (TTE) input used to disable or enable the fast-charge timer and charge termination.
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during
storage or handling to prevent electrostatic damage to the MOSFET gates.
ORDERING INFORMATION
TJ
CHARGE
REGULATION
VOLTAGE (V)
(1)
4.2
4.2
4.2
−40 C 125°C
−40°C to 125 C
4.2
4.2
4.2
OPTIONAL
FUNCTIONS
(1)
CE and TS
PG and CE
CE and TTE
TTE and TS
CE and TS
TE and TS
FAST-
CHARGE
TIMER
(Hours)
5
5
5
5
7
7
TAPER
TIMER
Yes
Yes
Yes
Yes
Yes
No
USB TAPER
THRESHOLD
PART
NUMBER
(2)
bq24020DRCR
bq24022DRCR
bq24023DRCR
bq24024DRCR
bq24025DRCR
bq24026DRCR
MARKINGS
10% of ISET1 Level
10% of ISET1 Level
10% of ISET1 Level
10% of ISET1 Level
10% of ISET1 Level
10% of selected
USB charge rate
AZS
AZU
AZV
AZW
AZX
ANR
(1) The DRC package is available taped and reeled only in quantities of 3,000 devices per reel.
DISSIPATION RATINGS
PACKAGE
DRC(1)
θ
JA
46.87
°C/W
TA < 40°C
POWER RATING
1.5 W
DERATING FACTOR
ABOVE TA = 25°C
0.021 W/°C
(1) This data is based on using the JEDEC High-K board and the exposed die pad is connected to a copper pad on the board. This is connected to the
ground plane by a 2x3 via matrix.
ABSOLUTE MAXIMUM RATINGS
over operating free-air temperature range unless otherwise noted(1)
bq24020, bq24022
bq24023, bq24024
bq24025, bq24026
Input voltage(2)
Output sink/source current
Output current
Output current
Operating free−air temperature range, TA
Junction temperature range, TJ
Storage temperature, Tstg
AC, CE, ISET1, ISET2, OUT, PG, STAT1, STAT2,
TE, TS, TTE, USB
STAT1, STAT2, PG
TS
OUT
−0.3 to 7.0
15
200
1.5
−40 to 125
−65 to 150
°C
UNITS
V
mA
µA
A
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds
300
(1) Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltages are with respect to VSS.
RECOMMENDED OPERATING CONDITIONS
(1)
MIN
Supply voltage (from AC input), VCC
Supply voltage (from USB input), VCC
Operating junction temperature range, TJ
2
4.5
4.35
−40
NOM
MAX
6.5
6.5
125
UNIT
V
V
°C