bq24010, bq24012, bq24013, bq24014
www.ti.com
SLUS530D − SEPTEMBER 2002 − REVISED SEPTEMBER 2003
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during
storage or handling to prevent electrostatic damage to the MOS gates.
ORDERING INFORMATION
TA
CHARGE
REGULATION
VOLTAGE (V)
(1)
4.2
4.2
−40°C to 125°C
4.2
4.2
OPTIONAL
FUNCTIONS
(1)
PG and TS
PG and CE
CE and TTE
CE and TS
PART NUMBER
(2)
bq24010DRC
bq24012DRC
bq24013DRC
bq24014DRC
MARKINGS
AZN
AZP
AZQ
AZR
(1) Contact Texas Instruments for other options.
(2) The DRC package is available only taped and reeled. Add R suffix to device type (e.g. bq24210DRCR) to order. Quantities are 3,000 devices per
reel.
DISSIPATION RATINGS
PACKAGE
DRC(1)
θ
JA
47
°C/W
TA < 40°C
POWER RATING
1.5 W
DERATING FACTOR
ABOVE TA = 40°C
0.021 W/°C
(1) This data is based on using the JEDEC High-K board and the exposed die pad is connected to a copper pad on the board. This is connected to the
ground plane by a 2x3 via matrix.
ABSOLUTE MAXIMUM RATINGS
(1)
UNIT
Supply voltage range, (VCC all with respect to VSS)
Input voltage range(2)
Voltage difference between VCC and IN inputs
VCC − VIN
Output sink/source current
Output current
Operating free−air temperature range, TA
Junction temperature range, TJ
Storage temperature, Tstg
STAT1, STAT2, PG
IN, OUT
IN, STAT1, STAT2, TS, PG, CE, TTE
BAT, OUT, ISET
−0.3 to 18
−0.3 to VCC
−0.3 to 7
±
0.5
15
1.5
−40 to 125
−65 to 150
°C
V
VDC
V
mA
A
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds
300
(1) Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltages are DC and with respect to VSS.
RECOMMENDED OPERATING CONDITIONS
(1)
MIN
Supply voltage(1), VCC
Input voltage(1), VIN
Operating junction temperature range, TJ
(1) Pins VCC and IN must be tied together.
3.0
3.0
−40
NOM
MAX
16.5
16.5
125
V
°C
UNIT
2