AM26LV32C, AM26LV32I
LOW VOLTAGE HIGH SPEED QUADRUPLE DIFFERENTIAL LINE RECEIVER
SLLS202E − MAY 1995 − REVISED JUNE 2005
D
D
D
D
D
D
D
D
D
Switching Rates up to 32 MHz
Operates From Single 3.3-V Supply
Ultra-Low Power Dissipation . . . 27 mW Typ
Open-Circuit, Short-Circuit, and Terminated
Fail-Safe
−0.3-V to 5.5-V Common-Mode Range With
±
200-mV Sensitivity
Accepts 5-V Logic Inputs With 3.3-V V
CC
Input Hysteresis . . . 50 mV Typ
235 mW With Four Receivers at 32 MHz
Pin-to-Pin Compatible With AM26C32,
AM26LS32, and MB570
D OR NS† PACKAGE
(TOP VIEW)
1B
1A
1Y
G
2Y
2A
2B
GND
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
V
CC
4B
4A
4Y
G
3Y
3A
3B
description/ordering information
The AM26LV32, BiCMOS, quadruple, differential line receiver with 3-state outputs is designed to be similar to
TIA/EIA-422-B and ITU Recommendation V.11 receivers with reduced common-mode voltage range due to
reduced supply voltage.
The device is optimized for balanced bus transmission at switching rates up to 32 MHz. The enable function
is common to all four receivers and offers a choice of active-high or active-low inputs. The 3-state outputs permit
connection directly to a bus-organized system. Each device features receiver high input impedance and input
hysteresis for increased noise immunity, and input sensitivity of
±
200 mV over a common-mode input voltage
range from −0.3 V to 5.5 V. When the inputs are open circuited, the outputs are in the high logic state. This device
is designed using the Texas Instruments (TI) proprietary LinIMPACT-C60 technology, facilitating ultra-low
power consumption without sacrificing speed.
This device offers optimum performance when used with the AM26LV31 quadruple line drivers.
The AM26LV32C is characterized for operation from 0°C to 70°C. The AM26LV32I is characterized for operation
from −45°C to 85°C.
ORDERING INFORMATION
TA
PACKAGE†
ORDERABLE
PART NUMBER
AM26LV32CDG4
D
0 C 70°C
0°C to 70 C
Tube
NS
SOP – D
−40°C to 85°C
SOP – NS
Tape and reel
Tube
Tube
Tape and reel
Tape and reel
AM26LV32CDR
AM26LV32CDRG4
AM26LV32CNS
AM26LV32CNSR
AM26LV32ID
AM26LV32IDR
AM26LV32INS
AM26LV32INSR
26LV32I
AM26LV32I
26LV32
AM26LV32C
TOP-SIDE
MARKING
† Package drawings, standard packing quantities, thermal data, symbolization, and PCB
design guidelines are available at www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
LinIMPACT-C60 and TI are trademarks of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright
2005, Texas Instruments Incorporated
POST OFFICE BOX 655303
•
DALLAS, TEXAS 75265
1
TI [ TEXAS INSTRUMENTS ]
