SNAS535H – OCTOBER 1999 – REVISED MARCH 2013
Figure 1. PDIP Package
See Package N0028E
Figure 2. PLCC
Package
See Package FN0028A
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings
(1) (2) (3)
Supply Voltage (V
CC
)
(4)
Voltage at Any Pin Except Control Inputs
Voltage at Control Inputs
(START, OE, CLOCK, ALE, ADD A, ADD B, ADD C)
Storage Temperature Range
Package Dissipation at T
A
=25°C
Lead Temp. (Soldering, 10 seconds)
PDIP Package (plastic)
PLCC Package
ESD Susceptibility
(1)
(2)
(3)
(4)
(5)
(5)
6.5V
−0.3V
to (V
CC
+0.3V)
−0.3V
to +15V
−65°C
to +150°C
875 mW
260°C
Vapor Phase (60 seconds)
Infrared (15 seconds)
215°C
220°C
400V
Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. DC and AC electrical specifications do not
apply when operating the device beyond its specified operating conditions.
All voltages are measured with respect to GND, unless otherwise specified.
If Military/Aerospace specified devices are required, please contact the TI Sales Office/Distributors for availability and specifications.
A Zener diode exists, internally, from V
CC
to GND and has a typical breakdown voltage of 7 V
DC
.
Human body model, 100 pF discharged through a 1.5 kΩ resistor.
(1) (2)
Operating Conditions
Temperature Range
Range of V
CC
(1)
(2)
T
MIN
≤T
A
≤T
MAX
−40°C≤T
A
≤+85°C
4.5 V
DC
to 6.0 V
DC
Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. DC and AC electrical specifications do not
apply when operating the device beyond its specified operating conditions.
All voltages are measured with respect to GND, unless otherwise specified.
Electrical Characteristics – Converter Specifications
Converter Specifications:
V
CC
=5 V
DC
=V
REF+
, V
REF(−)
=GND, T
MIN
≤T
A
≤T
MAX
and f
CLK
=640 kHz unless otherwise stated.
Symbol
ADC0808
Total Unadjusted Error
(1)
Parameter
25°C
T
MIN
to T
MAX
Conditions
Min
Typ
Max
±½
±¾
Units
LSB
LSB
(1)
Total unadjusted error includes offset, full-scale, linearity, and multiplexer errors. See
None of these A/Ds requires a zero or
full-scale adjust. However, if an all zero code is desired for an analog input other than 0.0V, or if a narrow full-scale span exists (for
example: 0.5V to 4.5V full-scale) the reference voltages can be adjusted to achieve this. See
Copyright © 1999–2013, Texas Instruments Incorporated
2
Product Folder Links:
TI [ TEXAS INSTRUMENTS ]
