Quick Setup Guide
+ LEFT SPEAKER OUTPUTS –
+ RIGHT SPEAKER OUTPUTS –
LOUT+
LOUT–
ROUT+
ROUT–
LEFT CHANNEL
OUTPUT FILTE RS
RIGHT CHANNEL
OUTPUT FILTERS
HEATSINK
MODE
PINS
TAS5538
PBTL – BTL
(+12 to
+36 Vdc)
NORMAL
S1
GND
RESET INPUT SIGNAL & CONTROL
Reset
INTERFACE (J1)
LED
+3.3Vdc
REGULATOR
PVDD
STATUS
LEDs
Figure 4. Physical Structure of the TAS5612L-TAS5614LDDVEVM (Approximate Layout)
2
Quick Setup Guide
This section describes the TAS5612L-TAS5614LDDVEVM power supplies and system interfaces. It
provides information regarding handling and unpacking, absolute operating conditions, and switch and
jumper positions. It also provides a step-by-step guide to setting up the TAS5612L-TAS5614LDDVEVM for
device evaluation.
2.1
Electrostatic Discharge Warning
Many of the components of the TAS5612L-TAS5614LDDVEVM are susceptible to damage by electrostatic
discharge (ESD). Customers are advised to observe proper ESD handling precautions when unpacking
and handling the EVM, including the use of a grounded wrist strap at an approved ESD workstation.
6
TAS5612L-TAS5614LDDVEVM
Copyright © 2012, Texas Instruments Incorporated
TAS5612LDDVEVM 6500567
TAS5614LDDVEVM 6524655
SLAU375 – May 2012
TAS5612L
TAS5614L