78P2352
Dual Channel
OC-3/ STM1-E/ E4 LIU
ELECTRICAL SPECIFICATIONS (continued)
RECEIVER JITTER TOLERANCE
The 78P2352 exceeds all relevant jitter tolerance specifications shown in Figures 16, 17. STS-3/OC-3 jitter
tolerance specifications are in ANSI T1.105.03-1994 and Telcordia GR-253-CORE. STM-1 (optical) jitter
tolerance specifications are in ITU-T G.813, G.825, and G.958. STM-1e (electrical) jitter tolerance
specifications are in ITU-T G.825. E4 specifications are found in ITU-T G.823. Receive jitter tolerance is not
tested during production test.
100
Electrical (CMI) Interfaces
G.825 - STM-1e Tolerance
(for 2048 kbps networks)
G.825 - STM-1e Tolerance
(for 1544 kbps networks)
10
G.823 - E4 Tolerance
1
0.1
0.01
1.E+00
10Hz
100Hz
1kHz
10kHz
100kHz
1MHz
10MHz
Jitter Frequency
Figure 16: Jitter Tolerance - electrical (CMI) interfaces
PARAMETER
CONDITION
MIN
NOM
MAX
UNIT
200Hz to 500Hz
500Hz to 10kHz
10kHz to 3.5MHz
10Hz to 19.3Hz
19.3Hz to 500Hz
500Hz to 6.5kHz
6.5kHz to 65kHz
65kHz to 1.3MHz
1.5
UIpp
µs
UIpp
UIpp
µs
UIpp
µs
UIpp
E4 Jitter Tolerance
750 f-1
0.075
38.9
750 f-1
STM-1e Jitter Tolerance
1.5
9800 f-1
0.15
Page: 35 of 42
2006 Teridian Semiconductor Corporation
Rev. 2.4
TERIDIAN [ TERIDIAN SEMICONDUCTOR CORPORATION ]
