欢迎访问ic37.com |
会员登录 免费注册
发布采购

73S1209F-68IMR/F 参数 Datasheet PDF下载

73S1209F-68IMR/F图片预览
型号: 73S1209F-68IMR/F
PDF下载: 下载PDF文件 查看货源
内容描述: 自包含的密码键盘,智能卡读卡器IC的UART至ISO7816 / EMV桥接IC [Self-Contained PINpad, Smart Card Reader IC UART to ISO7816 / EMV Bridge IC]
分类和应用:
文件页数/大小: 123 页 / 1421 K
品牌: TERIDIAN [ TERIDIAN SEMICONDUCTOR CORPORATION ]
 浏览型号73S1209F-68IMR/F的Datasheet PDF文件第91页浏览型号73S1209F-68IMR/F的Datasheet PDF文件第92页浏览型号73S1209F-68IMR/F的Datasheet PDF文件第93页浏览型号73S1209F-68IMR/F的Datasheet PDF文件第94页浏览型号73S1209F-68IMR/F的Datasheet PDF文件第96页浏览型号73S1209F-68IMR/F的Datasheet PDF文件第97页浏览型号73S1209F-68IMR/F的Datasheet PDF文件第98页浏览型号73S1209F-68IMR/F的Datasheet PDF文件第99页  
DS_1209F_004  
73S1209F Data Sheet  
FD Control Register (FDReg): 0xFE13 Å 0x11  
Table 91: The FDReg Register  
MSB  
FVAL.3  
LSB  
FVAL.2  
Symbol  
FVAL.1  
FVAL.0  
DVAL.3  
DVAL.2  
DVAL.1  
DVAL.0  
Bit  
Function  
FDReg.7  
FDReg.6  
FDReg.5  
FDReg.4  
FDReg.3  
FDReg.2  
FDReg.1  
FDReg.0  
FVAL.3  
FVAL.2  
FVAL.1  
FVAL.0  
DVAL.3  
DVAL.2  
DVAL.1  
DVAL.0  
Refer to Table 93 above. This value is converted per the table to set the  
divide ratio used to generate the baud rate (ETU). Default, also used for  
ATR, is 0001 (Fi = 372). This value is used by the selected interface.  
Refer to Table 93 above. This value is used to set the divide ratio used to  
generate the smart card CLK. Default, also used for ATR, is 0001 (Di = 1).  
This register uses the transmission factors F and D to set the ETU (baud) rate. The values in this register  
are mapped to the ISO 7816 conversion factors as described below. The CLK signal for each interface is  
created by dividing a high-frequency, intermediate signal (MSCLK) by 2. The ETU baud rate is created  
by dividing MSCLK by 2 times the Fi/Di ratio specified by the codes below. For example, if FI = 0001 and  
DI = 0001, the ratio of Fi/Di is 372/1. Thus the ETU divider is configured to divide by 2 * 372 = 744. The  
maximum supported F/D ratio is 4096.  
Table 92: Divider Ratios Provided by the ETU Counter  
FI (code)  
Fi (ratio)  
0000  
372  
4
0001  
372  
5
0010  
558  
6
0011  
744  
8
0100  
1116  
12  
0101  
1488  
16  
0110  
1860  
20  
0111  
1860⊕  
20⊕  
FCLK max  
FI(code)  
Fi(ratio)  
1000  
512⊕  
5⊕  
1001  
512  
5
1010  
768  
7.5  
1011  
1024  
10  
1100  
1536  
15  
1101  
2048  
20  
1110  
2048⊕  
20⊕  
1111  
2048⊕  
20⊕  
FCLK max  
DI(code)  
Di(ratio)  
0000  
0001  
1
0010  
2
0011  
4
0100  
8
0101  
16  
0110  
32  
0111  
1⊕  
32⊕  
DI(code)  
Di(ratio)  
1000  
12  
1001  
20  
1010  
1011  
1100  
1101  
1110  
1111  
16⊕  
16⊕  
16⊕  
16⊕  
16⊕  
16⊕  
Note: values marked with are not included in the ISO definition and arbitrary values have been  
assigned.  
The values given below are used by the ETU divider to create the ETU clock. The entries that are not  
shaded will result in precise CLK/ETU per ISO requirements. Shaded areas are not precise but are  
within 1% of the target value.  
Rev. 1.2  
95