Chip Trim Ceramic Trimmer Capacitors
AT 0300 ROHS & AT 1300 ROHS
S
URFACE MOUNT TRIMMER CAPACITORS, ROHS COMPLIANT
Recommended reflow solder temperature profile
Maximum Soldering Temperature 265°C MAX
Temp °C
PEAK 3 s Max
265°C
220°C
180°C
150°C
PREHEAT
1 to 2 mn
HEATING
30 to 60 s
Time
VI. PACKAGING
Parts are delivered :
- in bulk for quantity lower than 1 kp
- on tape and reel in 12 mm width carrier tape in quantities of 1 kp on 7 inches reel
VII. HOW TO ORDER
Parts in quantity < 1 kp
Reference ROHS
Example
AT 1310 RoHS
Parts on tape and reel :
Example
Reference R2 ROHS
AT 0303 R2 ROHS
VIII
.
TUNING
Recommended Tuning Tool reference: AT 8777
When tuning, do not apply an axial force higher than 1.5 N (150 g)
VIII. STORAGE
C
ONDITIONS
Do not store components under direct sunlight or in dewy environment, and in corrosive condition.
Before use, store components under condition of -10°C to +40°C and humidity of 75% RH Max.
It is recommended to use components within 6 months after delivery
TEMEX – CERAMICS, PARC INDUSTRIEL BERSOL 1, VOIE ROMAINE, 33600 PESSAC, France
TEL +33(0)5 56 46 66 66 FAX +33(0)5 56 36 31 98 www.temex-ceramics.com
FTC-Chip Trim .doc Ed 2