TMPG06-6.8/A THRU TMPG06-43/A
6.8V-43V 1.0mA-10mA
Automotive Transient Voltage Suppressors
FEATURES
®
• Patented PAR construction
• Available in Unidirectional polarity only
• 400 W peak pulse power capability with a
10/1000 µs waveform, repetitive rate (duty cycle):
0.01 %
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
• Typical I less than 1.0 µA above 10 V rating
D
• Solder Dip 260 °C, 40 seconds
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
MECHANICAL DATA
Case: MPG06, molded epoxy over passivated junction
Epoxy meets UL 94V-0 flammability rating
Terminals: Matte tin plated leads, solderable per
J-STD-002B and JESD22-B102D
HE3 suffix for high reliability grade (AEC Q101
qualified)
Polarity: Color band denotes cathode end
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
MAXIMUM RATINGS (T = 25 °C unless otherwise noted)
A
PARAMETER
SYMBOL
PPPM
IPPM
LIMIT
Minimum 400
see next table
1.0
UNIT
W
Peak power dissipation with a 10/1000 µs waveform (1) (Fig. 1)
Peak pulse current with a 10/1000 µs waveform (1,2) (Fig. 3)
Power dissipation on infinite heatsink at TL = 75 °C (Fig. 5)
Peak forward surge current 8.3 ms single half sine-wave (2)
Maximum instantaneous forward voltage at 25 A (2)
Operating junction and storage temperature range
A
PD
W
IFSM
40
A
VF
3.5
V
TJ, TSTG
- 65 to + 185
°C
Note:
(1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 °C per Fig. 2
(2) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum
1 of 3
E-mail: sales@taychipst.com
Web Site: www.taychipst.com