TSL260R, TSL261R, TSL262R
INFRARED LIGHT-TO-VOLTAGE OPTICAL SENSORS
TAOS049E −SEPTEMBER 2007
MECHANICAL DATA
The TSL260R, TSL261R, and TSL262R are supplied in a clear 3-lead through-hole package with a molded lens. The
2
2
2
2
integrated photodiode active area is typically 1,0 mm (0.0016 in ) for TSL260R, 0,5 mm (0.00078 in ) for the
2
2
TSL261R, and 0,26 mm (0.0004 in ) for the TSL262R.
PACKAGE S
PLASTIC SINGLE-IN-LINE SIDE-LOOKER PACKAGE
TOP VIEW
4.60
2.60
1.64
R 0.90
SIDE VIEW
FRONT VIEW
0.15
Note B
1.80
2.30
4.60
1
1.56
0.42
14.86 + 0.50
Pb
Lead Free
Available
2 y 2
0.42
0.47 TYP
NOTES: A. All linear dimensions are in millimeters; tolerance is ± 0.25 mm unless otherwise stated.
B. Dimension is to center of lens arc, which is located below the package face.
C. The integrated photodiode active area is typically located in the center of the lens and 0.97 mm below the top of the lens surface.
D. Index of refraction of clear plastic is 1.55.
E. Lead finish for TSL26xR: solder dipped, 63% Sn/37% Pb. Lead finish for TSL26xR−LF: solder dipped, 100% Sn.
F. This drawing is subject to change without notice.
Figure 14. Package S — Single-In-Line Side-Looker Package Configuration
Copyright E 2007, TAOS Inc.
The LUMENOLOGY r Company
r
r
www.taosinc.com
11