www.ti.com
Software Setup
2
Software Setup
2.1 System Requirements
The Sensing Solutions GUI supports:
•
64-bit Windows 7
•
64-bit Windows XP
The current GUI does not support 32-bit Windows operating systems. The host machine is required for
device configuration and data streaming. The following steps are necessary to prepare the EVM for the
GUI:
•
•
The GUI and EVM driver must be installed on the host.
The EVM must be connected to a high speed USB port (USB 2.0 or above).
2.2 Sensing Solutions GUI and EVM Driver Installation
The Sensing Solutions GUI and EVM driver installer is packaged in a zip file. Follow these steps to install
the software.
1. Download the software ZIP file from the EVM tool page
2. Extract the downloaded ZIP file
3. Run the included executable
4. Follow all directions from the installer
Figure 2. GUI Installer Welcome Page
7
SNOU138–June 2015
FDC2114 and FDC2214 EVM User’s Guide
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated
TAOS [ TEXAS ADVANCED OPTOELECTRONIC SOLUTIONS ]
