C2510Fx / CC2511Fx
Figure 53: Complete Radio Control State Diagram
14.12.1 Active Modes
three automatic calibration options, controlled
by the MCSM0.FS_AUTOCALsetting:
The radio has two active modes: receive and
transmit. These modes are activated directly
by writing the SRXand STXcommand strobes
to the RFSTregister.
• Calibrate when going from IDLE to
either RX or TX (or FSTXON)
• Calibrate when going from either RX or
The frequency synthesizer must be calibrated
regularly. CC2510Fx/CC2511Fx has one manual
calibration option (using the SCALstrobe), and
TX to IDLE automatically
• Calibrate every fourth time when going
from either RX or TX to IDLE
automatically
SWRS055D
Page 204 of 243