欢迎访问ic37.com |
会员登录 免费注册
发布采购

CC1111F32RSP 参数 Datasheet PDF下载

CC1111F32RSP图片预览
型号: CC1111F32RSP
PDF下载: 下载PDF文件 查看货源
内容描述: 低功耗低于1 GHz的射频系统级芯片(SoC )与MCU,存储器,收发器和USB控制器 [Low-power sub-1 GHz RF System-on-Chip (SoC) with MCU, memory, transceiver, and USB controller]
分类和应用: 存储射频控制器PC
文件页数/大小: 240 页 / 2823 K
品牌: TAOS [ TEXAS ADVANCED OPTOELECTRONIC SOLUTIONS ]
 浏览型号CC1111F32RSP的Datasheet PDF文件第163页浏览型号CC1111F32RSP的Datasheet PDF文件第164页浏览型号CC1111F32RSP的Datasheet PDF文件第165页浏览型号CC1111F32RSP的Datasheet PDF文件第166页浏览型号CC1111F32RSP的Datasheet PDF文件第168页浏览型号CC1111F32RSP的Datasheet PDF文件第169页浏览型号CC1111F32RSP的Datasheet PDF文件第170页浏览型号CC1111F32RSP的Datasheet PDF文件第171页  
CC1110Fx / CC1111Fx  
0xDF41: I2SCFG1 – I2S Configuration Register 1  
Bit  
Field Name  
Reset R/W  
Description  
7:3  
WORDS[4:0]  
01111 R/W  
This field gives the word size – 1. The word size is the bit-length of one sample for  
one channel. Used to generate the WS signal when in master mode.  
Reset value 01111 corresponds to 16 bit samples.  
Word counter copy / clear trigger  
2:1  
TRIGNUM[1:0] 00  
R/W  
00  
01  
10  
11  
No trigger. Counter copied / cleared by writing to the I2SWCNTregister  
USB SOF (CC1111Fx only)  
IOC_1 (P1_3)  
T1_CH0  
0
IOLOC  
0
R/W  
The pin locations for the I2S signals. This bit selects between the two alternative  
pin mapping alternatives. Refer to Table 50 on page 93 for an overview of pin  
locations.  
0
Alt. 1 in Table 50 is used  
1
Alt. 2 in Table 50 is used  
Note: The I2S interface will have precedence in cases where other periherals  
(exept for the debug interface) are configured to be on the same location.  
0xDF42: I2SDATL – I2S Data Low Byte  
Bit  
Field Name  
Reset  
R/W  
Description  
7:0  
I2SDAT[7:0]  
0x00  
R/W  
Data register low byte.  
If this register is not written between two writes to the I2SDATHregister, the low  
byte of the TX register will be cleared.  
Note: This register will be in its reset state when returning to active mode from PM2  
and PM3.  
0xDF43: I2SDATH – I2S Data High Byte  
Bit  
Field Name  
Reset  
R/W  
Description  
7:0  
I2SDAT[15:8] 0x00  
R/W  
Data register high byte.  
When this register is read, I2SSTAT.RXIRQ is de-asserted and the RX buffer is  
considered empty. When this register is written, I2SSTAT.TXIRQ is de-asserted  
and the TX buffer is considered full.  
Note: This register will be in its reset state when returning to active mode from PM2  
and PM3.  
0xDF44: I2SWCNT – I2S Word Count Register  
Bit  
Field Name  
Reset  
R/W  
Description  
7:0  
WCNT[7:0]  
0x00  
R/W  
This register contains the 8 low order bits of the 10-bit internal word counter at the  
time of the last trigger. If this register is written (any value),the value of the internal  
word counter is copied into this register and I2SSTAT.WCNT[9:8],and the  
internal word counter is cleared.  
Refer to section 13.15.11 for details about how to use this register.  
SWRS033E  
Page 167 of 239  
 
 
 
 
 
 
 复制成功!