CC1110Fx / CC1111Fx
Parameter
Min
Typ
Max
Unit
Condition
System clock running at 26 MHz or 24MHz.
Active mode with
radio in TX,
433 MHz
Digital regulator on. High speed crystal oscillator and low power
RCOSC running. Radio in TX mode
33.5
20
mA
mA
mA
+10 dBm output power (PA_TABLE0=0xC0)
0 dBm output power (PA_TABLE0=0x60)
-6 dBm output power (PA_TABLE0=0x2A)
System clock running at 26 MHz or 24MHz.
19
Active mode with
radio in TX,
868, 915 MHz
Digital regulator on. High speed crystal oscillator and low power
RCOSC running. Radio in TX mode
36.2
mA
+10 dBm output power (PA_TABLE0=0xC2). See Table 7 for typical
variation over operating conditions
21
20
mA
mA
mA
0 dBm output power (PA_TABLE0=0x50)
-6 dBm output power (PA_TABLE0=0x2B)
4.3
Power mode 0
Power mode 1
Same as active mode, but the CPU is not running (see 13.1.2.2 for
details). System clock at 26 MHz or 24MHz
220
Digital regulator on. HS RCOSC and high speed crystal oscillator off.
32.768 kHz XOSC or low power RCOSC running (see 13.1.2.3 for
details)
µA
Power mode 2
Power mode 3
0.5
0.3
µA
µA
Digital regulator off. HS RCOSC and high speed crystal oscillator off.
Low power RCOSC running (see 13.1.2.4 for details)
1.0
Digital regulator off. No crystal oscillators or RC oscillators are
running (see 13.1.2.5 for details)
Peripheral
Current
Add to the figures above if the peripheral unit is activated
Consumption
Timer 1
Timer 2
Timer 3
Timer 4
ADC
2.7
1.3
1.6
2
When running
When running
When running
When running
When converting
µA/MHz
µA/MHz
µA/MHz
µA/MHz
mA
1.2
Table 6: Current Consumption
SWRS033E
Page 12 of 239