7. Plugs Usage Precautions
7.1. Mating / unmating
(1) To disconnect connectors, insert the end portion of I-PEX under the connector flanges
and pull off vertically, in the direction of the connector mating axis.
(2) To mate the connectors, the mating axes of both connectors must be aligned and the
connectors can be mated. The "click" will confirm fully mated connection. Do not attempt
to insert on an extreme angle.
7.2. Pull forces on the cable after connectors are mated
After the connectors are mated, do not apply a load to the cable in excess of the values
indicated in the diagram below.
SPE-12-8-001/D/SS
Page 8 of 9
TAOGLAS [ Taoglas ]
