1.0 Introduction
The AP.17F is a two stage 17mm active patch antenna that has been designed specifically for embedded
(inside device) integration with GPS receiver modules.
The AP.17F combines a 17*17*4mm advanced low profile ceramic patch antenna with a one stage LNA
and a front-end SAW filter with ultra thin coaxial cable. It comes with it’s own integrated ground-plane.
The front end SAW filter reduces the risks where there is a cellular transmitter nearby of interference from
out of band frequencies which can cause LNA burn-out, saturation, or radiated spurious emissions.
The antenna can work on a wide input voltage from 1.8V to 5.5V with best in class power consumption
figures.
If further tuning and optimization specific to a customer device is required Taoglas offers a custom tuned
and optimized part service. Contact sales@taoglas.com for more information.
Cables and connectors can be customized according to request.
ANTENNA
SAW Filter
LNA
I-PEX +cable
2.1 Rated Environmental Conditions
No
Parameter
Specification
2.1.1
2.1.2
2.1.3
Operation Temperature
Storage Temperature
Relative Humidity
-40°C to + 85°C
-40°C to + 85°C
40% to 95%
2.2 Electrical Specifications
No
Parameter
Specification
2.2.1
Input Voltage
Min:1.8V Typ.: 3.0V Max: 5.5V
SPE-11-8-145/C/SS
Page 2 of 11