8. Plugs Usage Precautions
8.1 Mating / unmating
(1) To disconnect connectors, insert the end portion of I-PEX under
the connector flanges and pull off vertically, in the direction of the
connector mating axis.
(2) To mate the connectors, the mating axes of both connectors must
be aligned and the connectors can be mated. The "click" will confirm
fully mated connection. Do not attempt to insert on an extreme angle.
8.2. Pull forces on the cable after connectors are mated
After the connectors are mated, do not apply a load to the cable in
excess of the values indicated in the diagram below.
SPE-12-8-003/B/SS Page 12 of 13
TAOGLAS [ Taoglas ]
