Capacitance change
tanδ：
：Within ±30.0%
220000pF～470000pF
1000000pF
：15.0% max
：22.5% max
：17.5% max
2200000pF
Insulation resistance：
220000pF
：100MΩ min
：50MΩ min
：25MΩ min
：25MΩ min
470000pF
1000000pF
2200000pF
Rate voltage：25VDC
Capacitance change
tanδ：
：Within ±30%
：10.0% max
10000pF～47000pF（Item△J）
Insulation resistance：
10000pF～47000pF（Item△J）
Rate voltage：35VDC
Capacitance change
tanδ：
：500MΩ min
：Within ±30.0%
：20.0% max
10000000pF
Insulation resistance：
10000000pF
：5MΩ min
Rate voltage：50VDC
Capacitance change：
10000pF～1000000pF
tanδ：
：Within 30.0%
10000pF～100000pF
220000pF～470000pF
1000000pF
：10.0% max
：12.5% max
：17.5% max
Insulation resistance：
10000pF～100000pF
220000pF～470000pF
1000000pF
：500MΩ min
：250MΩ min
：50MΩ min
Temperature
Duration
: 85 ＋3/－0 ℃
: 1000 ＋48/－0 hrs
: Rate voltage×2
Applied voltage
: Rate voltage×1.5
Class 2: B,B5 1000000pF（025Type）
Test Methods and
Remarks
: B,B5 220000pF～10000000pF（050Type, 075Type）
Preconditioning
Recovery
: 1 hr of preconditioning at 150 ＋10－0 ℃ followed by 48±4 hrs of recovery under the standard condition.
: 24±2hrs of recovery under the standard condition after the removal from test chamber.
（Class1）
: 1 hr of preconditioning at 150＋10－0 ℃ followed by 48±4 hrs of recovery under the standard condition after the
removal from chamber. （Class 2）
Note on standard condition： "standard condition" referred to herein is defined as follows：
5 to 35℃ of temperature, 45 to 85% relative humidity, and 86 to 106kPa of air pressure.
When there are questions concerning measurement results：
In order to provide correlation data, the test shall be conducted under condition of 20±2℃ of temperature, 60 to 70% relative humidity, and 86 to 106kPa of air
pressure.Unless otherwise specified, all the tests are conducted under the "standard condition."
Withstanding voltage is also referred to as "voltage proof" under IEC specifications.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_leaded_reli_e-E02R01
TAIYO YUDEN [ TAIYO YUDEN (U.S.A.), INC ]
