10000000pF
: 17.5% max
Rate voltage : 50VDC
10000pF～100000pF
220000pF～470000pF
1000000pF
: 7.5% max
: 10.0% max
: 15.0% max
Measuring frequency
Measuring voltage
Bias application
: 1MHz±10％
: 1kHz±10％
: 1kHz±10％
: 120Hz±10％
: 1.0±0.5Vrms
: 1.0±0.2Vrms
: 1.0±0.2Vrms
: 0.5±0.1Vrms
: None
（Class1 : C≦1000pF）
（Class1 : C＞1000pF）
（Class2 : C≦10μF）
（Class2 : C＞10μF）
（Class1 : C≦1000pF）
（Class1 : C＞1000pF）
（Class2 : C≦10μF）
（Class2 : C＞10μF）
Test Methods and
Remarks
８．Capacitance：Change due to Temperature or Rate of Capacitance Change
When voltage is not applied
Class1（Temperature
Multilayer type
CH : 0±60
Compensating）
SL : －350～＋1000 [ppm/℃]
Multilayer type
Specified Value
±10%（B5 : ±15%）
＋30/－85 %
（Characteristics：B, B5）
Class2（High Dielectric）
Multilayer type
（Characteristics：F）
Measurement of capacitance at 20℃ and 85℃, －25℃ shall be made to calculate temperature characteristic by the following equation.
（Class 1）
（C85－C20）
×106（ppm/℃）
C20×△T
Change of maximum capacitance deviation in step 1 to 5（Class2）
Step
Temperature（℃）
Test Methods and
Remarks
1
2
3
4
5
20
－25
20（Reference temperature）
85
20
※In the B5 characteristics is, the Temperatures of step 1,3, and 5 are 25℃.
9．Terminal Strength
Tensile
Class1（Temperature
Multilayer type
Compensating）
Multilayer type
Specified Value
No abnomalities, such as cuts or looseness of terminals.
（Characteristics：B, B5）
Class2（High Dielectric）
Multilayer type
（Characteristics：F）
Apply the stated tensile force progressively in the direction to draw terminal.
Nominal wire diameter［mm］
0.45・0.55
Tensile force［N］
19.6
Duration［s］
5
Test Methods and
Remarks
Torsional
Class1（Temperature
Compensating）
Multilayer type
Multilayer type
Specified Value
No abnomalities, such as cuts or looseness of terminals.
（Characteristics：B, B5）
Class2（High Dielectric）
Multilayer type
（Characteristics：F）
Suspend a weight of specified mass at the end of the terminals and incline the body through the angle of 90 degrees and return it to the
initial position.
This operation is done over a period of 5 sec. Then second bend in the opposite direction shall be made.
Number of bends : 2 times
Test Methods and
Remarks
Nominal wire diameter［mm］
0.45・0.55
Bending force［N］
2.45
Mass weight［kg］
0.25
10．Resistance to Vibration
Class1（Temperature
Compensating）
Appearance ： No significant abnomality
Withstanding Voltage ： No abnomality
Specified Value
Multilayer type
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_leaded_reli_e-E02R01
TAIYO YUDEN [ TAIYO YUDEN (U.S.A.), INC ]
