TRANSIENT VOLTAGE
SUPPRESSOR
P6KE SERIES
BR
V
: 6.8 - 440 Volts
PK
P : 600 Watts
D2A
FEATURES :
1.00 (25.4)
* 600W surge capability at 1ms
* Excellent clamping capability
* Low zener impedance
0.161 (4.10)
MIN.
0.154 (3.90)
0.284 (7.20)
0.268 (6.81)
* Fast response time : typically less
then 1.0 ps from 0 volt to VBR(min.)
* Typical I less then 1 A above 10V
m
R
1.00 (25.4)
MIN.
0.0400 (1.02)
0.0385 (0.98)
MECHANICAL DATA
* Case : D2A Molded plastic
* Epoxy : UL94V-O rate flame retardant
* Lead : Axial lead solderable per MIL-STD-202,
method 208 guaranteed
Dimensions in inches and (millimeters)
* Polarity : Color band denotes cathode end except Bipolar.
* Mounting position : Any
* Weight : 0.645 gram
Rating at 25 C ambient temperature unless otherwise specified.
°
Rating
Symbol
Value
Unit
PPK
Minimum 600
W
Peak Power Dissipation at Ta = 25 °C, Tp=1ms (Note1)
Steady State Power Dissipation at TL = 75 °C
Lead Lengths 0.375", (9.5mm) (Note 2)
Peak Forward Surge Current, 8.3ms Single Half
Sine-Wave Superimposed on Rated Load
(JEDEC Method) (Note 3)
D
P
5.0
W
IFSM
100
A
Operating and Storage Temperature Range
TJ, TSTG
- 65 to + 175
°C
Notes :
(1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25 C per Fig. 1
°
(2) Mounted on Copper Leaf area of 1.57 in2 (40mm2).
(3) 8.3 ms single half sine-wave, duty cycle = 4 pulses per minutes maximum.
Page 1 of 3
Rev. 02 : January 28, 2004
SYNSEMI [ SYNSEMI, INC. ]
