Technical Specification
Quarter
48V 3.3/1.8V
77W
out
in
Brick Dual
ORDERING INFORMATION
PART NUMBERING SYSTEM
Refer to the website for the most current list of valid model
numbers and ordering options for converters in this product
family. When ordering SynQor converters, please ensure
that you use the complete 15 character part number con-
sisting of the 12 character base part number and the addi-
tional 3 characters for options.
The part numbering system for SynQor’s DualQor DC/DC
converters follows the format shown in the example below.
DQ 6 33 18 Q G L 08 N K S
Options (see
Ordering Information)
Output Power (W)
Thermal Design
Output Max Output
Model Number
Input Voltage
Voltages
3.3/1.2 V
3.3/1.5 V
3.3/1.5 V
3.3/1.8 V
3.3/2.5 V
5.0/3.3 V
3.3/1.2 V
3.3/1.5 V
3.3/1.5 V
3.3/1.8 V
3.3/2.5 V
5.0/3.3 V
Power
68 W
72 W
80 W
77 W
87 W
100 W
68 W
72 W
80 W
77 W
87 W
100 W
Performance Level
Package Size
DQ63312QGL07xyz
DQ63315QGL07xyz
DQ63315QGL08xyz
DQ63318QGL08xyz
DQ63325QGL09xyz
DQ65033QGL10xyz
DQ63312QGA07xyz
DQ63315QGA07xyz
DQ63315QGA08xyz
DQ63325QGA09xyz
DQ65033QGA10xyz
35 - 75 V
35 - 75 V
35 - 75 V
35 - 75 V
35 - 75 V
35 - 75 V
35 - 75 V
35 - 75 V
35 - 75 V
35 - 75 V
35 - 75 V
35 - 75 V
Output Voltage 2
Output Voltage 1
Input Voltage
Product Family
The first 12 characters comprise the base part number and
the last 3 characters indicate available options. Although
there are no default values for options, the most common
options are negative logic, 0.145” pins and standard fea-
ture set. These part numbers are more likely to be readily
available in stock for evaluation and prototype quantities.
Modules listed above with QGA in part number have an
increased bottom side board clearance and a slightly larg-
er total height (see page 2 for dimensions). There are no
other differences from the QGL units.
Application Notes
The following option choices must be included in the last
three places of the model number.
A variety of application notes and technical white papers
can be downloaded in pdf format at www.synqor.com.
Options Description
Enable
Logic
Pin
Feature
Set
Length
K - 0.110"
S - Standard
T - 2nd Trim
pin
P - Positive N - 0.145"
N - Negative R - 0.180"
Y - 0.250"
Contact SynQor for further information:
Warranty
SynQor offers a three (3) year limited warranty. Complete warranty
information is listed on our web site or is available upon request from
SynQor.
Phone:
Toll Free: 888-567-9596
Fax:
508-485-8434
508-485-8414
E-mail:
Web:
sales@synqor.com
www.synqor.com
Information furnished by SynQor is believed to be accurate and reliable.
However, no responsibility is assumed by SynQor for its use, nor for any
infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any
patent or patent rights of SynQor.
Address: 188 Central Street
Hudson, MA 01749
Product # DQ63318QGL08
Phone 1-888-567-9596
Doc.# 005-2DQ638D Rev. B
10/7/03
Page 14