SM59D04G2
8-Bits Micro-controller
16KB+ ISP Flash & 1KB RAM embedded
Product List
Features
SM59D04G2L25, 25MHz 16KB internal Flash MCU
SM59D04G2C25, 25MHz 16KB internal Flash MCU
Operating Voltage: 2.7V ~ 3.6V or 4.5V ~ 5.5V
General 8052 family compatible
12 or 6 clocks per machine cycle
Frequency runs up to 25MHz
16K byte on chip program Flash with In-System
Programming(ISP) and EEPROM capability
768 Bytes on-chip expanded RAM with disable
function
256 Bytes for standard 8052 RAM.
External RAM address up to 64KB
Dual 16-bit Data Pointers (DPTR0 & DPTR1)
One channel serial peripheral interface (UART)
Three 16 bit Timers/Counters(Timer 0 , 1, 2)
Four 8-bit I/O ports for PDIP package
Four 8-bit I/O ports + one 4-bit I/O ports for PLCC
or QFP package
Programmable Watchdog Timer (WDT)
Programmable Counter Array (PCA) for Pulse
Width Modulation (PWM), capture and compare
External interrupt 0, 1 with two priority level
Expanded External Interrupt (EEI) interface for
eight more external interrupts.
ISP service program space configurable in N*512
byte (N=0 to 8) size for IAP application
Direct and simple ICP programming without
service program
ALE output select for low EMI
Clock output as the source for next MCU
Power Management Unit ( IDLE and STOP mod)
Code protection function
Flash Memory Endurance : 100K erase and write
cycles each byte at TA=25℃
Flash Memory Data Retention :10 years
Description
The SM59D04G2 series product is an 8-bit single chip
macro-controller with 16KB Flash & 1K byte RAM
embedded. It is a derivative of the 8052 micro-controller
family with a fully compatible instruction sets.
The 16K embedded Flash can be programmed via a
commercial writer or ISP (In-System Programming) or ICP
(In-Circuit Programming) function. The unused Flash can
be the memory space for the EEPROM application through
the ISP. After programming, the code can be protected to
prevent illegal read and write.
Its plentiful peripherals can make many applications easier
and more efficient, such as dual DPTR, UART, WDT,
Timers, PCA and EEI which are functionally compatible
with most other chips.
SM59D04G2 also provides power saving modes (IDLE and
STOP), low EMI characteristics, etc. All of the
requirements are considered to achieve the ideal MCU.
Ordering Information
yymmv
SM59D04G2ihhkL
yy: year, mm: month
v: version identifier{ A, B,…}
i: process identifier {L=2.7V~3.6V,C=4.5V~ 5.5V}
hh: working clock in MHz {25}
k: package type postfix {as below table}
L:PB Free identifier
{No text is Non-PB Free，”P” is PB Free}
Postfix
P
J
Q
Package
40L PDIP
44L PLCC
44L QFP
Pin / Pad Configuration
Page 2
Page 3
Page 4
Contact SyncMOS : www.syncmos.com.tw
6F, No.10-2 Li- Hsin 1st Road , SBIP,
Hsinchu, Taiwan 30078
TEL: 886-3-567-1820 FAX: 886-3-567-1891
Specifications subject to change without notice contact your sales representatives for the most recent information.
ISSFD-M031
1
Ver.C SM59D04G2 07/2009
SYNCMOS [ SYNCMOS TECHNOLOGIES,INC ]
