SM59A16U1
8-Bit Micro-controller
64KB with ISP Flash
& 6K+256B RAM embedded
01: FU_EN[7:6] should be set as 01 only. The other value is inhibited.
Notice:
FU_EN[7:6] should be set as 01 before read/write data transfer for bus
release; otherwise, SCL will be locked(pull low).
FU_EN[7:6] should be set as 01 after read/write data transfer for receiving a
stop condition from bus master.
In transmit data mode(slave mode), the output data should be filled into
IICRWD before setting FU_EN[7:6] as 01.
FU_EN[7:6] will be auto-clear by hardware, so setting FU_EN[7:6] repeatedly
is necessary.
Specifications subject to change without notice contact your sales representatives for the most recent information.
ISSFD-M071
Ver A SM59A16U1 04/12/2013
- 102 -