CL7
Linear, 100mA, Constant Current
LED Driver with Enable
Features
►
►
►
►
►
►
100mA ±5% constant current drive
Built-in reverse polarity protection
Logic level enable
Dimmable via EN pin
Overtemperature protection
90V max rating for transient immunity
General Description
The CL7 is a linear fixed current regulator designed for
driving high brightness LEDs at 100mA from nominal 12V,
24V, and 48V power supplies. With a maximum rating of
90V, it is able to withstand transients without the need for
additional transient protection circuitry. The CL7 is offered
in the Power SO-8 package.
An active low enable input (EN) allows logic level control
of the LED for on/off control or PWM dimming. The enable
input has 100kΩ pull-down resistance. For applications not
needing an enable input, refer to the CL6 data sheet.
Overtemperature protection shuts off the LED current
when the die temperature rises above 135°C (nominal).
Full LED current resumes when the die temperature falls
below 105°C (nominal).
Applications
►
►
►
►
►
Flashlights
Specialty lighting
Low voltage signage
Low voltage lighting
This device is not rated for automotive applications!
Typical Application Circuit
V
IN
100mA
V
DD
Host
Controller
EN
OUT
Control
100kΩ
CL7
GND