Part Number: ZMD45W-2
www.SunLED.com
3.5x2.8mm SMD CHIP LED LAMP
The device has a single mounting surface. The device
Recommended Solering Pattern
must be mounted according to the specifications.
(Units : mm; Tolerance:± 0.1)
Tape Specification (Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous intensity / luminous flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
Published Date : FEB 27,2008
Drawing No :SDSA1904
V4
Checked : B.L.LIU
P.3/4