Part Number: XZMDK81FS
2.8 x 0.8 mm Right Angle SMD Chip LED Lamp
ꢀ The device has a single mounting surface.
The device must be mounted according to
the specifications.
ꢀ Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
ꢀ Reel Dimension (Units : mm)
ꢀ Tape Specification (Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/ꢀ1nm
2. Luminous intensity / luminous flux: +/ꢀ15%
3. Forward Voltage: +/ꢀ0.1V
Note: Accuracy may depend on the sorting parameters.
Dec 02,2020
XDSB3984 V7ꢀX Layout: Maggie L.
P. 4/5
SUNLED [ SUNLED CORPORATION ]
