SMB118
Advanced Datasheet
1
(See Last Page)
Seven-Channel Programmable DC-DC Power Manager with Battery Charger
FEATURES & APPLICATIONS
•
Digital programming of all major parameters via I C interface
and non-volatile memory
o
Output voltage setpoint/margining
o
Sequencing & digital soft start
o
Enable/Disable outputs independently
o
Input/Output UV/OV voltage thresholds
o
PWM/PFM mode, switching frequency
•
Six programmable regulator channels with 1.5% accuracy
o
Three synchronous step-down (buck) with
internal PFETs
o
One configurable step-up (boost) or
synchronous step-down (buck)
o
One step-up (boost)
o
One adjustable output voltage LDO
•
Programmable Linear Li-Ion Battery Charger
o
Precharge/fast charge/termination current
o
Fast Charge voltage threshold
o
Float Voltage (<1% accuracy)
•
+2.7V to +6.0V Input Range (Higher system voltages supported)
•
Built-in current limiting, UV/OV, and thermal protection
•
Highly accurate reference and output voltage (<1.5%)
•
500 to 1000kHz PWM frequency and power saving automatic
PFM mode
•
96 bytes of user configurable nonvolatile memory
2
INTRODUCTION
The SMB118 is a highly integrated and flexible seven-channel power
manager designed for use in a wide range of portable applications.
The built-in digital programmability allows system designers to custom
tailor the device to suit almost any multi-channel power supply
application from digital camcorders to mobile phones.
The SMB118 integrates all the essential blocks required to implement
a complete seven-channel power subsystem including three
synchronous step-down “buck” converters, one configurable step-up
“boost” or step-down synchronous “buck” converter, one step-up
“boost” converter, one linear regulator (LDO) and a fully programmable
Li-Ion
battery
charger.
Additionally
sophisticated
power
control/monitoring functions required by complex systems are built-in.
These include digitally programmable output voltage setpoint, power-
up/down sequencing, enable/disable, margining and UV/OV
input/output monitoring on all channels.
The integration of features and built-in flexibility of the SMB118 allows
the system designer to create a “platform solution” that can be easily
modified via software without major hardware changes. Combined
with the re-programmability of the SMB118 this facilitates rapid design
cycles and proliferation from a base design to futures generations of
product.
The SMB118 is suited to battery-powered applications with an input
range of +2.7V to +6.0V and provides a very accurate voltage
2
regulation (<1.5%). Communication is via the industry standard I C
bus. All user-programmed settings are stored in non-volatile EEPROM
of which 96 bytes may be used for general-purpose memory
applications. The commercial operating temperature range is 0C to
+70C, the industrial operating range is –40C to +85C, and the
available package is a 48-pad 7mm x 7mm QFN.
Applications
•
•
•
•
Portable Media Players
Digital camcorders/still cameras
Smart PDA/Camera phones
Handheld GPS/PDA’s
•
TFT-LCD Displays/Monitors/TV’s
SIMPLIFIED APPLICATIONS DRAWING
SMB118
+4.5V to +6.0V
DC IN
Li-Ion
Charger
Step-Up
(Boost)
Channel
+0.5V to +35V (Prog.)
LED Backlight
Drive
Li-Ion Battery
or
+2.7V to +6.0V
LDO
Channel
+1.5V to +3.75V (Prog.)
MCU/RTC
I2C/SMBus
Step-Up
(Boost) or
Step-Down
(Buck)
Channel
System
Control and
Monitoring
+0.5V to +35V (Prog.)
Memory, I/O
+0.5V to Vin (Prog.)
3 Step-
Down
(Buck)
Channels
Pushbutton Power
Shutdown
CPU Core
+0.5V to Vin (Prog.)
DSP/CODEC
5 Status Outputs
+0.5V to Vin (Prog.)
Analog/RF
Figure 1 – Applications block diagram featuring the SMB118 six-channel, programmable DC/DC converter.
This integrated power supply and battery manager provides precision regulation, monitoring, cascade
sequencing, output margining and battery charging.
© SUMMIT
Microelectronics, Inc. 2005
1717 Fox Drive • San Jose CA 95131 • Phone 408 436-9890 • FAX 408 436-9897
1
http://www.summitmicro.com/
0.4 10/7/2005
SUMMIT [ SUMMIT MICROELECTRONICS, INC. ]
